Armchair-beds without armrests

Armchair beds without armrests - practical, comfortable and functional furniture. Due to their optimal size, they contribute to the rational use of small space, they can organize a permanent or temporary sleeping place and are an excellent interior decoration.

The chairs of this type, although they perform all the basic functions of the chair-bed, but have a number of differences, and in some respects they are completely superior to products with armrests:

• Copies without sidewalls save space in the room, like all folding models. Do not take extra centimeters armrests, which is very important for small apartments;
• They look more stylish and easy in comparison with the volume models of usual armchairs;
• Do not limit the top of the bed;
• Eliminate the possibility of injury to a hard sidewall surface;
• They allow you to easily use removable covers and sit on the seat on either side, which is very convenient;
• They have a low weight, so they can be easily moved to a new place.

For daily operation, products with a roll-out and sliding transformation mechanism are better suited, preferably on a metal or all-wood frame due to their durability and high wear resistance. In case infrequent unfolding of a berth is supposed, then when buying you can only focus on the color and design of the model:

• model with mechanism "Accordion" Popular because of its ease of use, bed comfort and price. The frame is often made of steel, which is important for permanent use. The case consists of three sections, which are arranged according to the “accordion” type, while the product does not budge and even a child can cope with it. Mattress and wooden slats - orthopedic. The berth is obtained absolutely flat, without gaps, seams and height differences between the modules. There is a deep laundry compartment, which makes this model more functional;

• Eurosofalso known as "Belgian cot", also refers to the sliding type of transformation mechanisms and is suitable for permanent use as a bed. Due to the lack of armrests, such items are also available with a reinforced frame. To decompose Eurosofu just pull the seat forward and onto the free space resulting from this manipulation to lay the backrest;

• roll-out models. In them the bed hides under the seat and, if necessary, rolls out in one motion. For models without sidewalls suitable model with a rolling out mechanism "Dolphin". It is reliable and simple. For unfolding it is enough to roll out the lower module and pull it up. The disadvantage of this design is the presence of gaps and gaps in the bed. Plus - the presence of a box for bedding;

• "Eurobook" - Another version of the vykatnoy model. In order to expand the bed, you need to pull the lower module towards you, as a result of which the backrest will lower itself;

• “Walking Eurobook” or “Tik-Tac”. It differs from the “Eurobook” in that the berth does not roll out, but “paces” forward, without damaging the floor and carpet.The chair is supplied with a linen box, and due to the absence of armrests it has a small weight and is easy to move;

• "Conrad" - option "Dolphin", has a robust and sturdy construction, extends according to the principle of a telescope - three modules are moved one by one;

• ottoman transformer. Popular as a bed for children. A large selection of models without armrests makes this look very popular for small children's rooms and bedrooms.

By production of chairs ecologically safe and modern materials are used, due to the great diversity of which it is possible to produce products in different price categories:

• frame. It is made of wooden parts, metal, laminate and chipboard. For seats that are purchased as a permanent bed, an all-wood frame of hardwood or metal is necessary;
• spring block. Chairs made with the use of such a block have excellent orthopedic properties, durable, not subject to deformation, do not sit out for a long time and do not lose shape. For the production of many models used spring block "Bonnel", which consists of biconical springs of continuous weaving, which allows you to evenly distribute the load and easily withstand a weight of up to 180 kg per square meter;
• filler. At production of chairs two types of a filler are used: artificial and synthetic. The first includes sintepon, hollofayber, polyurethane foam and foam rubber. Products made using synthetic materials are much cheaper. Natural - this is felt, feather and down. Recommended for people with allergies, prevent the appearance of fungus and pathogens, as well as the occurrence of mold. The cost of such pieces of furniture is quite high;
• upholstery. Nubuck and faux leather are good. They are perfectly breathable, wear-resistant, easy to clean and come in a wide color palette. Tapestry and flock are durable, beautiful, pleasant to the touch. Pile fabrics look noble, but require special care, quickly get dirty and prone to rapid abrasion of the pile.

If the armchair is bought for daily use, then it is better to refuse from shenil and jacquard. Despite their beauty and aesthetics, they are short-lived and will quickly lose their appearance.Leather is a good option for temporary placement and as an interior item.

Before you buy a chair, you need to measure the place where it is supposed to be installed and after that decide on the size of the product:

• great It is desirable that the depth of such specimens does not exceed 70 cm, otherwise people of small stature will experience discomfort due to the fact that the legs will not reach the floor and for convenient placement you will need an additional footrest or pillow under your back. The width of large seats is up to 130 cm, and the height of the back should not be more than 120, otherwise the head will be in an unnatural position and the neck will quickly tire;
• small and narrow. The width of such compact products without armrests starts from 70 cm. But for organizing a berth for an adult this is not enough. The seat height in such specimens does not exceed 25 cm, and the depth is 50. The height of the backrest is 80 cm.This is enough only to lean back, there is not enough room for the head. Small chair-beds can be used as guest furniture or installed on the balcony or in the loggia. Will be good in the nursery and small size, freeing up space for games.
• wide. For products that are not fitted with sidewalls, a width of 120-130 cm is ideal. A fold-out chair with such a seat is a complete berth suitable for everyday use. This is the width of most models with the mechanism of transformation "Accordion" and "Click-klyak".

A variety of models are presented in a wide price range. Due to the use of various materials, manufacturers produce products as a very budget-friendly options, and very expensive. Therefore, this type of chairs can be found in the student dormitory room, in the nursery, and in the stylish living room, decorated in Art Nouveau or Art Deco style. The price of products depends on the size. For example, consider the model "Economy" with a chair height of 45 cm and a seat depth of 50 cm. Transformation mechanism "Accordion", the framework is made of a bar of solid breeds and multilayered plywood. The linen box has a depth of 17 cm, upholstery material of the 2nd category.

Armchair beds without armrests have a lot of positive feedback due to its ergonomics and functionality. Consumers say that there is a possibility of using such models as a bed, which is transformed into a stylish interior item that takes up much less space than products with armrests. Also noted is the convenience when accommodating guests for the night.

Not ignored and a large price range with the possibility of acquiring very inexpensive products. Buyers also appreciated the variety of colors and design, which allows them to purchase both nursery furniture, made with elements of the image of a fairytale animal, and a model for a bedroom or living room, decorated in soft pastel colors. The presence of wheels in many products is also noted, which makes the chair-beds more mobile.

Of the minuses, a faster failure of the transformation mechanism is noted. This is due to the reduction of points of support due to the lack of armrests, and, as a consequence, an increase in the load on the mechanism. Also chair beds without sidewalls are not suitable for all interiors. They will perfectly fit into Hi-tech or Modern, but in Classic or Baroko they will look something foreign. In the presence of upholstery made of slippery material in conjunction with the lack of sidewalls, bed linens are knocked down and moved out.

Due to its compactness and convenience, such furniture can be found in any premises - living rooms, bedrooms, nurseries, kitchens and even loggias. A comfortable place to rest if necessary can easily turn into a bed or just let you lie down to relax with a book during the day. That is why the chair-beds without armrests are so popular and do not lose their relevance.

In the next video, see a review of the compact model without armrests.