Latex mattresses

A sleeping mattress should provide healthy rest and comfort. Latex mattresses created on the basis of natural material - sap of the Hevea tree successfully cope with this function.

Latex is a derivative extracted from the sap of a rubber tree. The latter was discovered by Columbus and brought in the form of an elastic ball, funny jumping off the surface. At this point, its existence could have exhausted itself, if later technological progress did not open up vulcanization and did not give a new life to latex, far from the life of a merry trinket. Latex began to produce tires for military equipment, elastic bandages, patches, nipples, sports equipment, linoleum, pillows, paints and much more.

Latex mattresses have appeared relatively recently, however, they have already gained popularity and consumer confidence. The model may consist of:

• solid latex with a surface made from natural materials;
• combinations of latex with other mechanisms of the mattress, for example, a spring block.

It is worth noting that latex has its own varieties. It can be natural and artificial. In the first variant, tree sap is used exclusively, in the second, its mixture. Unfortunately, in the process of moving goods from supplier to buyer, the difference in price between them is almost erased, and therefore it is almost impossible to distinguish them from each other. Honest sellers with a good reputation - the key to a successful purchase without cheating.

The advantages of the latex mattress today elevate it over other species. Not so long ago, latex was used exclusively for the top layer in conjunction with springs, but today it is increasingly possible to see independent products from this material. And this demand is pretty understandable, because a large number of people want to sleep on natural surfaces, to avoid chemical fumes and allergic reactions. Latex for this purpose fits perfectly.In addition, with its use, you can forget about such unpleasant pests as dust mites. Latex product is a clean and environmentally friendly home..

In addition to high hygienic properties, consumers choose material for a high level of comfort. The fact is that latex easily changes shape and also quickly returns to its original position. This distinguishes it from interconnected springs or soft filling, which sags under the weight of the body, providing insufficient support to the body. This is due to the majority of back pain and sleep disorders. Latex, as well as independent spring blocks, has an orthopedic effect. Another feature of the raw material is diversity. When it is manufactured using the Dunlop method, a sufficiently dense and solid sheet of latex is obtained, suitable for the base of the mattress. With the help of the Talalay method, a soft base is created, perfectly suited as a top layer of mattress.

Natural latex can cause allergies. And despite the fact that the probability of this is small, it is not necessary to exclude such a possibility, especially if there is a tendency to such allergic reactions. Synthetic latex does not cause allergies, but can easily cause headaches during the first time of use. The fact is that synthetic additives in it have a specific smell, which gradually disappears. People with a keen sense of smell usually endure this period. As mentioned earlier, natural latex is very durable. The mattress of it can be used for decades without a break, enjoying the orthopedic effects on the body. However, this does not apply to a synthetic mattress; after a few years of use, the artificial material begins to crumble and thin, losing its preventive properties for the back and joints.

Foamed polyurethane, known to us as foam rubber, has been familiar to everyone since the time of grandparents.And familiar, it should be said, not from the best side. Looseness, excessive softness - the only associations that pop up in memory. However, today his era has passed, and an improved product with elasticity, hardness and density came to replace it. In hard performance it equates to orthopedic surfaces. To all existing polyurethane foam has another major drawback. Its service life is no more than eight years, while natural latex and after 2 decades pleases with its quality. However, the cost of the material is twice lower than the innovative product. So, the choice remains solely within the framework of the family budget and the possibility of a periodic change of bed.

Coconut mattress with coir, as well as latex is a 100% natural product. It has high orthopedic properties, possible due to its rigidity. For many, this property is fundamental.That coconut is popular as a mattress for cots. Its convenience in front of latex is controversial for some. So, excessive rigidity adversely affects the sleep of older people. However, if the mattress has latex impregnation, then such problems are not observed, and therefore it can be considered a good alternative to latex.

Latex mattress has several varieties. In addition to natural latex, ergolatex or, in other words, polyurethane foam in tandem with latex may be involved in the manufacture. His main difference is the property of "memory". It takes the curves of the body like plasticine, which makes sleep especially comfortable. However, this mixture easily absorbs odors and moisture, which is not the case with a mattress, which consists of a latex monolith.

Traditionally, the rigidity of the mattress is estimated on a five-point scale. Thus, on sale you can see a soft and moderately soft mattress, a model of medium hardness, moderate and hard options. As mentioned earlier, latex in the Dunlop method of manufacturing is a moderately hard option, while Talalay’s material provides the mattress with softness. Increasing the density and rigidity, in the model add coconut and high density polyurethane foam.

Choosing the perfect option for yourself, you should focus not only on personal preferences, but also on the recommendations of doctors. So, for overweight people who reach 100 kg, it is recommended to choose hard mattresses, since on a soft surface the body will bend and the spine will not receive the correct support. People under 50 kg, on the contrary, are advised to purchase a soft mattress, since the hard one cannot bend in accordance with the natural shape of the spine. Children under 5 years old are recommended hard mattresses, because, as you know, in infants the spine has a straight shape, which is important to keep in proper condition. Clients who do not fall into any of the categories are offered a wide choice of moderately hard to moderately soft mattresses.

Today you can see different mattresses.The thin version has a thickness of 5 cm, high - up to 50 cm. The layer thickness, optimal for a person of average build, reaches 16-18 cm. Thinner mattresses are suitable as a temporary bed or as a second layer for softness. High mattresses cause positive emotions among specialists, however, one should also take into account the depth of the bottom of the bed itself. Ideally, the mattress should not protrude more than 15 cm above the base.

Speaking about the width and length of the bed, there is a golden rule, the points of which read:

• The correct length of a berth is considered to be the height of a person with an additional margin of 10-15 cm;
• the correct width varies within making 70-80 cm for one person. It should be noted that the measurement is approximate and varies individually depending on the size of the owner of the bed.

Most often, mattresses come to our house in ready-made versions and sizes, and therefore it is important to navigate with them with maximum accuracy. Standard cots from birth to three years have a size of 120x60 cm, there is also a length of 140 cm in models-transformers with a chest of drawers. The mattress for sleeping crumbs can be equal to 119x60x10. A small thickness of 10 cm will provide a good degree of stiffness for brittle growing joints.

After three years, the child becomes cramped in his first crib, which means it comes time to choose a more spacious model, both in length and in width. The bed size table indicates that a child from three years old will fit mattresses of a length from 140 to 190 cm and from 70 to 80 cm. So, in bunk beds with a small berth fit mattresses 63x158 and 65x156. For freestanding structures, as a rule, the width of the bed increases and the size of the mattress are 160x70, 80x150 and 68x153. Not only toddlers, but also teenagers 12 years and older can comfortably sit on such spacious places.

And yet in adolescence, parents rush to buy a new bed for their child. The width of the mattress for a child of 10 years can stay within 70x160 cmHowever, experts advise to increase the width, starting from 75 cm. The maximum width can be either 100 cmso and 120 cm. The length of a berth varies within 190 and 200 cm. Mattresses for teens are almost equal to adult beds. Among the popular adult models you can see single mattresses. 78x193 and 73x198 and double mattresses 160x200 tall 17 cm

It is also important to decide on the choice of a monolithic mattress or "sandwich". For children of preschool age, a construction with one layer or with the absence of a spring block is recommended, since jumping and jogging on beds have a negative effect on springs. On the other hand, the “sandwich” in sheets of latex in tandem with coconut is perfect for both adults and children. In addition, a double-sided mattress with a hard and soft surface on both sides, suitable for various surfaces, will be a good choice. Monolithic mattress with a memory effect is great for adults and the elderly with the prevention of diseases of the spine. Another important criterion is the case.. Natural material such as cotton or calico will perfectly fulfill its function. Synthetic fibers in the composition will provide good density. When buying, it is important to think about a mattress pad with protection from moisture and stains.

Latex mattresses are made by companies in Russia, Italy, Ukraine and other countries.Thus, one of the leading Russian firms consider Dreamline. In their assortment you can find the combined models of natural and artificial latex, "sandwiches" from coconut coir and latex.

Another famous brand from Russia is the company. Consul, began manufacturing orthopedic bases in 2002. A wide choice allows you to find a mattress with an independent spring unit and a latex surface on both sides.

Firm Ascona - Another powerful brand in the Russian market. The products are distinguished by European quality, because the company is part of the largest Swedish concern. The independent spring block in the models is organically combined with a layer of latex and a cover of natural quilted cotton and calico.

Company "Toris" also has a wealth of experience in the production of high-quality mattresses, which allocates a wide range. So, thin mattresses with a good orthopedic effect have a thickness of only 4 cm, while tall models rise by 25 or more centimeters.

Thus, the leading position among the luxury class is occupied by the version of the French company mattress Regents Park. In addition to 700 independent springs, it has two soft layers of latex for the summer and for the winter side. It is worth noting that natural latex is used, which significantly extends the service life of the product. Second place is occupied by a budget latex mattress without springs "DreamLine Soft". Soft material allows it to be used in beds with a variable headboard. Despite the fact that the mattress costs much less than its French competitor, it also uses natural perforated latex. Mattresses are worthy of attention "Toris contour" 16 series "Foam" and "Consul Classic Cornelius". Natural and durable, they provide the most comfortable soft and at the same time elastic sleeper.

Satisfied users of latex mattresses remain their happy owners for more than 10 years and do not cease to rejoice in their quality and durability. So, young parents are happy to noticethat jumping children on an adult bed no longer gives them so much concern that the mattress could deteriorate and the springs fail. Some consider monolithic latex models to be too soft, but these opinions are strictly personal. Definitely loved by users options with coconut coir and latex. Here the stiffness of the bed can be traced as well as possible.

According to commentators, the best places to buy are countries where latex is produced, for example, in Bangkok in a latex factory. However, large Russian firms also enjoy a good reputation, which cannot be said about online stores. So, people who bought mattresses of dubious quality and production, but cost-effective, feel the very mean who will have to pay twice. The materials in such firms do not match their description on the sites, and therefore the consumer buys a kind of "cat in the bag."

In the next video, see the review of the latex mattress, its useful properties and characteristics.