Sizes of a double bed

The main dominant of the bedroom design is the bed. When choosing the right place to sleep, it is very important to pay attention not only to the appearance and material of manufacture, but also to its size. With proper choice of bed dimensions, its owner will sleep sweetly, like a baby.

In general, when choosing a comfortable and comfortable bed, you should pay attention to several parameters:

• The size of the room;
• The parameters of the person who will sleep on this bed;
• How many people should it contain;
• Specific sleep habits of the owner.

It is necessary to take into account another important aspect when choosing the dimensions of the bed - there are two options for the measurement system. For European countries, the metric system is characteristic, that is, if the manufacturer is located in Italy, France or Germany, then you can safely specify the meters.

In the USA and the UK and Australia, the base unit will be the foot. It should be borne in mind that when ordering a bed in Europe, it is better not to take a mattress in America, as feet can not dock with meters.

Dimensions are considered standard, in which the bed length is on average 20 cm longer than the height of its future owner. Width is not so much a mandatory and standardized parameter; in order to choose the right individual, you need to lie on your side and bend your knees - they should not be outside the bed and hang over the floor.

As a rule, manufacturers receive orders for certain bed parameters, they are called standard - 160 x 200, 160 x 190, 140 x 200 and 140 x 190. For products made of bamboo, usually 200 x 200 or 200 x 220 are considered as standard sizes. cm. If there is a selection of a bed for a tall person, then standard sizes can be called 220x240 cm.

In addition to the basic parameters such as width and length, do not forget about one of the important points, namely the height of the bed. It represents the distance from the floor to the mattress and is divided into several types: high, medium and low.

For the interior in the Loft style, you should choose low beds, their height will be only 20-30 cm and will bring modern trends in the atmosphere. For the most comfortable sleep, the best option would be the average height (40-60cm), and beds from 70 to 90 cm in height are perfect for tall people or the elderly who complain about problems with mobility of joints, because it is easiest to sit down and get up from such beds.

Determining the width of the bed, it should be understood for how many people it is intended. Based on these arguments It is possible to identify several types of beds, the reason for the difference of which was precisely their width:

• Single beds;
• Double beds (or beds for two);
• One and a half;
• Baby.

Manufacturers rely on certain parameters in the manufacture of each type of bed, but with an individual order for semicircular, oval or square products the approach will be different, but the payment will be appropriate.

By purchasing a single bed, as a rule, for a person of small stature, you can focus on the size of 100 x 200 or 150 x 200. This width is offered by domestic manufacturers, while European ones are more inclined to a width of 90 to 100 cm.Also, a special name and completely different parameters have beds, released for the American market, they come in several options - Twin and Twin Extra Long. The latter are intended for a tall man who loves to sleep restlessly, they are 99 cm wide, and 203 long.

One and a half beds are perfect for people who love space, their width is from 120 to 160 cm, and European companies prefer to produce them from 140 cm. The area of ​​the loft is quite large, it is suitable not only for one person, even two can accommodate on it , but it is necessary to consider their dimensions.

American manufacturers also have the names of single and half-sleeping beds different from European and Russian companies. The sizes of such beds also start from 120 cm, for example, Small Double in width reach 122 cm, and Double or Full can be 137.2 cm.The widest bed will be a little more than 150 cm, it is called Queen, in length it also exceeds 2 meters.

The optimal width for a double bed will be 160 cm, it will allow two people of medium build, to perfectly accommodate each in their own half. For a more convenient location and a restful sleep, you can buy a mattress with independent springs, it is made according to the standard sizes of double beds.

Also provides a width of 140 cm for people of a more fragile physique, or 180 cm or 200 for large dimensions, as well as just for those who like to stretch their arms while sleeping. If a double bed is chosen for a family with small children, then a width of 200 cm will be optimal, it will contribute to the comfortable placement of all family members and their pleasant rest. Thus, the standard size of double beds can be considered 180x200.

Available options for individual orders from manufacturers for double beds, if for any reason, the future owner needs a non-standard width.It will be necessary to provide the measurements of the product to private organizations or to the plant, they must indicate not only the width, but also the length and height of the bed. It should be understood that such a project is definitely not cheap for the customer, because in addition to the main work on the bed, you will need to select textiles, mattress and bedding of the desired special sizes.

If we talk about the width of non-standard models, then we need to understand that it can be dictated not only by a strange interior, but also by the size of the room. As a rule, the width of a round bed will be 200-220 cm, so for its placement you will need an appropriate area of ​​the room. Naturally, in addition to a bed in the shape of a circle, there can also be other interesting ideas for interior design: an unusual shape with different sleeping places for beds, on which more than 2 people will later have to stay.

As previously mentioned, in order to choose a suitable bed length, you need to add to the height of the person to whom it will belong, 30 cm. You can also add a few more centimeters, provided you choose a massive pillow for sleeping.For lucky owners of tall Some tricks that will help with the choice of a bed, as usual beds of standard sizes (180-200 cm) will not be enough:

1. You can purchase a bed that will have no back;
2. European pillows are smaller than domestic products, so you can make a choice in their favor;
3. Bamboo beds are long, you can buy a bed made from this material;
4. Or take measurements and send a request for the manufacture of beds on an individual sketch.

Choosing a double bed you need to understand that the purchase of a mattress in accordance with the size of the bed will be an important component of this purchase. The moment that is worth paying attention to when choosing a mattress is the country of manufacture. And it is typical for both products.If you buy a mattress made in Europe, then the bed should be exactly according to European standards, but not American.

Here the foreground is a different measurement system, feet and meters will not fit together, and inches will become fractional centimeters. Then it turns out that buying an American bed, you need to buy a mattress in the same place. Otherwise, you will have to make an individual order for your favorite bed, which can cost a lot of money. In Russia, there are certain standards when choosing mattresses, their length can be from 190 to 200 cm, but they can vary in width. It varies from 80 cm for beds with one berth and up to 190-200 cm for wide double beds.

As already mentioned, when choosing a mattress in the first place the dimensions of the bed are taken into account. The length and width of the frame should correspond in size with the mattress, the latter should fit into them. Do not forget about another parameter - height, the mattress should not be higher than necessary.

If the mattress is purchased for an old bed, to which no documents can be precisely found, then it is enough just to make the necessary measurements and go with them to the store. It is necessary to measure the inner side of the bed frame, then there will definitely not be any problems with the selection of a mattress for it.

When measuring, deviations of 1 centimeter are permissible, such an error may be present. But if it is more - 2 or 3 cm, then you have to make an order for individual production. It is impossible to round off to a greater or to a lesser degree, otherwise when the mattress does not fit properly, it quickly wears out, since the upholstery is erased.

The standard length of the mattress for a bed will vary from a minimum of 190 cm to a large one of 200 cm, for convenience, the range also includes mattresses of average length - 195 cm. Parameters of the length of the mattress are quite strict, unlike the parameters of height. Otherwise, you can still call it thick, and it depends entirely on the preferences of the person.

There are certain types of mattresses that differ from each other in thickness of the product:

• A height of 16 cm is found on products without springs.It can also vary and be one centimeter lower or several centimeters higher. If the thickness of the product is from 2 to 10 cm, then they cannot be fully named and used as a mattress, they will perform the role of an additional seal that can be placed on the old sofa with sagging springs;
• If the products are with springs, the thickness will vary from 20 to 32 cm, It all depends on the model of the mattress. There are also higher products, they are far from cheap, as a rule, they are 50 cm in height.

Often, embodying the bold design ideas for interior design, you may need mattresses for round, square or star-shaped beds. Pick up a standard mattress in the store will not work, but you can make an individual order for the production of products that are suitable in size. Naturally, a private order will cost a lot, but manufacturers are happy to take this opportunity.

The big plus of individual orders is that the customer can independently choose the filling of the mattress, its height and the number of springs in it. You can also choose your own upholstery for the product. Usually the price of a mattress under the order exceeds the cost of the standard by 5 -10%.

As mentioned earlier, the standards of beds made in Europe can be correlated with products of Russian manufacturers. Their dimensions, as a rule, are 160 x 200 cm. Along with this, a huge number of interesting products are produced according to European standards.

One of the most common models is a double bed, which can be from 160 to 220 cm wide. Sometimes manufacturers produce beds to match with interesting design solutions, namely, square ones. By and large, such a bed is not too different from a rectangular one, for it there is no need to purchase certain bed linen, it takes up almost as much space as its counterpart.

Due to the ratio of width and length on this bed, you can sit in a comfortable position for any person. As a rule, it comes complete with two bedside tables, located on the sides of the hotel type.

Another option dominant bedroom can be a round bed. Despite the fact that it is obviously not suitable for the option of rectangular pastel linen, manufacturers may well offer to make it to order, such requests are not uncommon. The important point is that such an item will not fit into every interior, it is inherent in the style of Art Deco. When installing a round bed in a room, it should be understood that a more or less standard size for it is a diameter of 220 cm.

An interesting design solution can be a hanging bed, made according to European standards. The width and length of such a double bed can be chosen arbitrarily - from 160 x 200 to 200 x 220 cm. A hanging bed brings lightness and relaxation to the interior of the room, the room is filled with light and air. At the same time, it is as reliable as a bed on ordinary legs, but it also has its minus points - it can become loose.

In order to install such a bed in a room, it is necessary to carry out certain installation work, during which it is attached to the ceiling with the help of ropes, cables or chains. This may cause more difficulties, but will not affect its quality in any way. The ropes that hold the bed can be integrated into the design of the room, adding style and charm to the room.

Often, such a suspended bed is placed near the panoramic window, due to the play of light, it seems to be floating in the air, making the room more relaxed. There are no special rules for the height of the mounting of such beds, they can be both high and low above the floor. The latter option is suitable for families with small children, as it is safer.

As mentioned earlier, the standards of the countries producing double beds vary. If we are talking about European companies, the bed will be made in the same dimensions as the domestic one, 180 x 200 cm are considered standard.When it comes to American, British and Australian manufacturers, It is necessary to take into account the difference in the measurement system, so the width and length of the bed, measured in feet, will differ from the usual numbers:

• If at the disposal of the future owner there is a spacious room, which is decorated in a modern style, then the bed will fit into the interior "Ipanema" from the Italian manufacturer Alberta Salotti. This company is considered a manufacturer of luxury furniture, the quality and prices of their respective. Such a model will be a standard size (180 x 200), it is made from natural and eco-friendly materials, as a rule, the main element is wood. If desired, the product can be upholstered in leather or cloth, which will give the room refinement.

• Buying a bed from American manufacturers, you can safely enter it into the interior in the style of Country or Provence. Company Ashley produces double beds in this style with a metal headboard. It should be remembered that for such a bed it is necessary to select a mattress of appropriate size, therefore it is better to buy both products from the same manufacturer.
• A budget option can be a bed model "Caspian Wenge", which is produced in standard sizes 160 x 200. It will not be so spacious, however it will conveniently be placed in a room with a small area.

The situation is different with double beds from American manufacturers, they are called Queen (1,5-bedroom) or King, their sizes can truly be called royal. The unit of measurement for them is the inch, their dimensions may vary depending on the place of production and the version of the brands. In the markets are models of eastern and western types.

Double beds can be named Standard King, Eastern King or just King, it all depends on the size:

• 72 x 78 inch beds available in the UK;
• 76 x 80 inches will be a double bed purchased in America;
• 72 x 80 inches produce products in Australia.

When translated into clear centimeters, the length of a double bed in the USA and Australia will be approximately 203 cm, and in England - 198 cm. The width will also not fit the Russian standards: a berth in the United States will be a maximum of 193 cm wide, and in other countries it may be 184 cm.

Before proceeding to the selection of linen for a double bed, it is important to choose based not only on the texture, material of manufacture or beautiful, suitable to the interior of the color scale, but also from the sizes. And this should be done in the first place, as well-chosen bedding for bedspreads, pillows or blankets contribute to a peaceful and healthy sleep.

Of course, it should be understood that The Russian-made pillowcase most likely will not fit the pillow made in America, and sheets of European tailoring will not always fit in size for a domestic mattress. There are also certain standards for bed linen, as well as for mattresses and furniture.

In this regard, the first step in the acquisition of bed linen should be the determination of the size - length and width - mattress, pillows and blankets or blanket. It is important to remember that the sheet must be larger in width than the mattress, preferably 8-10 cm. Also, the duvet cover should be longer than the blanket, but only 5-7 cm.

The difference in bed linen may not always be the parameters, but also the equipment, As a rule, a sheet, a duvet cover and two pillow cases are included in the kit by Russian manufacturers. This set is designed for a married couple, made for standard double beds. Naturally, you can also find on sale sets of bed linen, which do not include all accessories.

The market now presents various sets of bed linen, distinguish them by name and size. In addition to the standard set for double beds, there are also eurosets. They are slightly larger in size than a complete set for a bed with two berths, while it will fit perfectly for massive orthopedic mattresses and voluminous sofas. Also an interesting option can be family kits made for spouses who like to sleep, each under their own blanket. The set contains from two to four pillowcases, a sheet and two one-and-a-half duvet covers.

Also paying attention to bed linen made in Europe or America, you should remember a few important facts:

• European manufacturers prefer to make pillows in the shape of a square, France produces them with parameters 65 x 65, Germany - 80 x 80 cm. But already Spanish and Italian manufacturers will prefer rectangular pillows with parameters 50 x 70 cm;
• An interesting fact is that in different countries the complete set of linen looks different: the inhabitants of the New World prefer to use a sheet instead of a duvet cover, which is fastened to the bedspread with buttons or a zipper.

According to the existing standards of bedding from Europe, there are certain dimensions: 2-bed - linen for a double bed, king-size - sets for beds with non-standard length and width (more than usual). In addition to such designations, you can also meet full or double, they are also quite suitable for a double bed.

Very often when ordering a set of bedding from foreign companies have the opportunity to purchase a set of sheets with an elastic band edging. They are very easy to use, the gum fixes the sheet, does not allow it to slip or get crumpled. If the package has the inscription "fitted sheet", then this sheet is included in the box.

In addition to the basic parameters, before buying a bed you should pay attention to the smaller, it would seem, questions. Correctly selecting the bed frame, the mattress to it and bedding, do not always remember the material from which the product is made. WITHNow in a wide access to the market are beds made of solid wood, wrought iron, as well as chipboard or MDF:

• Of course, the leading position is occupied by furniture, made of wood, as it is the most eco-friendly and useful material. In addition, products made from it will serve the owner much longer and retain a decent appearance. The most common wood species used to make beds are oak, beech and ash.

• The second place can be safely given to products made of metalHowever, they have one very big minus - they are afraid of dampness and moisture, which contribute to corrosion and the destruction of the metal. But manufacturers have found a way out of this situation - special protective varnishes and paints are now being sold, which will effectively protect furniture from damage and moisture.
• More and more popular materials for the production of double beds are becoming MDF and chipboard. Although they are not as durable and reliable as an array, but they also have their advantages. They are much easier, more mobile, which allows manufacturers to slightly reduce the price of products made from such materials. Such materials have a significant disadvantage - they can adversely affect human health, releasing formaldehyde, but modern manufacturers in the production process are trying to get rid of these effects.

How to choose the right bed and mattress, see the following video.