How to remove the liquid wallpaper from the wall?

No matter how stylish, elegant and fashionable interior was, over time it has to be updated. Even the most expensive and high-quality finishing materials become useless during use. Especially quickly the presentation losing wallpaper. Many factors have a negative effect on the wall decoration: sunlight, scratches, moisture and much more. To update the premises, it is necessary to remove the old finishing material as quickly, easily and safely. Then we will talk about how to remove from the walls of liquid wallpaper in various ways.

Before beginning the process of removing the trim from the walls and ceiling, it is necessary to carry out a certain scope of work. It is worth noting that the removal of wallpaper is accompanied by a large amount of debris and dust, so the room must be prepared properly.

We begin the preparatory stage:

• from the room where the repair is carried out, you need to take out all the furniture.Bulky items that are difficult to transport need to be wrapped with film or paper;

• doors should be protected using polyethylene. It is recommended to dismantle the trim. This material is used to protect the flooring;

• frames are removed from all outlets and switches. Next, with the help of masking tape close them. Scotch is also useful for fixing the film;

• windows and window sill should be wrapped with a thick film;

• it is recommended to close all the fixtures with an oilcloth and fix it with scotch tape.

To remove the liquid wallpaper (depending on the method of removal) will need these tools:

• several metal spatulas;

• building hair dryer;

• brush;

• a knife;

• special solution for softening wallpaper;

• Sander;

• masking tape

Depending on the density and thickness of the layer, a special solution is prepared, which makes it possible to significantly reduce the operating time. The easiest way is to wet the wallpaper with warm water and pick it up a bit before removing. A more effective way is to mix warm water with household chemicals.

You can use and improvised means. For example, add a little shower gel, liquid soap, shampoo or dish detergent to the water. It is worth noting that this solution is completely safe for health. It can be used in a home where pets or children live. In the interior spaces, users with experience in removing liquid wallpapers recommend using this composition: 2 tablespoons of vinegar, as well as 2 tablespoons of conditioner (hair product) are diluted in 5 liters of water. After the solution is applied to the wallpaper.

A direct surface grinder will help you quickly and effectively remove old wallpaper. The disadvantages of this method are the accumulation of dust that forms during work. Also, this technique requires physical strength and endurance.

Before the start:

• Eyes should be protected with goggles;

• because of the dust you need a respirator. It will protect the respiratory organs from debris.

In the process of work it is necessary:

• press the device tightly to the surface with wallpaper;

• act carefully so as not to injure yourself.

If you fix a special grinding wheel on the grinder, you can use it instead of a typewriter. It is highly recommended to use nozzles, the main task of which is to protect the walls from damage during operation. Do not forget that in the process of work should strictly comply with safety regulations.

One of the most budget and durable methods of removing the finish is to remove with a conventional metal spatula. If you choose this method, be prepared to spend a lot of time. Experts recommend using a spatula only if the material remains in its original form (without adding paint or varnish).

For work you will need:

• the main tool is a spatula. The model with a curved handle will be more efficient;
• a container filled with warm water;
• wide tassel.

Starting to remove the wallpaper:

• in water you need to dilute the substance to soften the coating or use one of the tips described above;
• with a brush evenly cover the wallpaper. If necessary, try again until the coating is loose.We'll have to wait a bit;
• after the work done, the wallpaper should become more plastic. It is time to remove the finishing material with a spatula.

If the two above-mentioned methods for removing wallpaper for any reason do not suit you, we suggest that you familiarize yourself with another effective method. Instead of a metal spatula or power tools, you can use a building dryer. Before work, the wallpaper is downloaded with plain water (or with the addition of a solution) and then processed with a hairdryer.

This technique has several disadvantages:

• it will take a lot of time to process all walls;
• in some cases, after dismantling the liquid wallpaper can be reused. When deleting with the use of a hair dryer, this function is not possible;
• Remember that the device consumes a lot of electricity.

To significantly speed up the process of removing the wallpaper of the above type, the finishing material can be pre-softened using a steam generator. Hot steam will make the raw material more friable and pliable.Be careful when using this device.

When removing liquid wallpaper from the surface of drywall, you must be very careful not to cause significant damage to the base. Experts recommend to abandon the manual methods of removing the finish, as these techniques can irreparably spoil the drywall. Despite the complexity of the work, there are several ways to safely remove the material.

Consider next one of them. In order to remove old liquid wallpaper and drywall and not damage it should:

• for work you will need a toothed knife or roller and needles. With their help, you need to scratch the wall to violate the integrity of the coating. Work should be extremely neat;

• after finishing the material is moistened with warm water or a substance with a special solution using a trouser or sponge. Due to the damage to the wallpaper, the liquid will more effectively affect the material. For greater efficiency, you can use a steam generator;

• leave the wallpaper for about 30 minutes and then begin to gently remove the coating in small pieces with a spatula or scraper.

If the first treatment with water did not give results, you should wait a little longer for the liquid to start to act or to try again.

To clean the ceiling of old liquid wallpaper, you can use any of the above methods, but there are some recommendations nevertheless. Despite the effectiveness of electrical appliances, such as a grinder or grinder, you should find yourself, since this is a heavy machinery, which requires not only experience, but also power. Considering the uncomfortable position while working under the cleaning cloth, you can get injured by dropping the device from your hands.

You can use a steam generator or building fixtures, but only if they are compact in size and do not weigh much.

Regardless of the method of removing the wallpaper, it is necessary to protect the eyes, hands and face from particles of material and dust.Use construction gloves, special masks, goggles and respirators. Avoid the use of electrical appliances, which consume a lot of electricity, if the house has old wiring, otherwise you risk getting a short circuit. If, nevertheless, the use of such items is necessary, then pre-turn off other devices from the network.

How to remove the liquid wallpaper from the wall, you can clearly see in the video below.