Metal garage: features and benefits of metal structures for storing a car

When purchasing a car as a property, any car owner thinks about a “dwelling” for his car. Having a garage, a motorist saves himself from frequent redecorating his car due to the occurrence of corrosion, the actions of hooligans or an unexpectedly fallen down tree branch. In addition, street storage can be called a slow killing of the “iron horse”, leaving the car in a paid parking lot the owner faces with the cost of his guard.

A person does not always have extra money and time to build a warm capital garage. In addition, garage communities in most cities are beyond the city limits. If we take into account the daily use of the car, then there is a need for extra spending on the road to your garage cooperative.Reducing the cost of building a garage and paying labor, owners often consider options for the construction of a separate metal garage.

Recently, leaders of many municipalities began to struggle with the construction of iron garages in urban areas. Despite this, such designs are still popular among car enthusiasts. This phenomenon is due to several aspects:

• The most challenging factor is construction costs. The cost of building a brick or block garage is disproportionately high. Assembling metal construction is much cheaper.
• Fulfillment of an order for the manufacture of elements of the future metal garage and their delivery to the assembly site will take only a few days.
• Assembly usually does not take much time and effort and does not require special skills.
• If required, the metal garage can be made collapsible.

As in any business, when building a metal garage, the car owner must take into account the existing shortcomings, including:

• Iron garage practically does not retain heat. In case of sudden temperature changes, condensation may occur.Such a phenomenon badly acts not only on the car, but also on the building itself.
• Usually buildings of this type are not equipped with electricity. This minus makes the repair and maintenance of the car is very difficult. High probability of freezing locks. In a cold room, the car is harder to start and warm up.
• Ease of assembly can allow attackers to easily get to the car.

Despite these shortcomings, the metal garage is comfortable and reliable in operation. As for the defects, they are easily eliminated by the proper arrangement.

Despite the fact that the metal garage is not unusual, many car owners are lost in the variety of samples offered. Their main distinguishing feature is the method and place of manufacture and the service life prior to purchase. When buying a garage, you must pay attention to the warranty, license and title documents of the seller.

It is possible to build a collapsible iron garage with the participation of a pair of assistants, having only the basic tool kit (hammer, wrenches, pliers) available. In the factory sets of excellent quality, all fasteners and components usually do not cause difficulties during assembly. Moreover, it does not require complex equipment to fit the elements. Many of the enterprises engaged in the manufacture of metal structures can deliver their goods to the assembly site.

In some cases, the owner himself has to spend money on the removal of the structure from the factory. Anyway, the only significant disadvantage here is the overestimated cost due to transportation.

On the information portals for sale or exchange, you can find a used factory or homemade version. The advantage in this case is in the price, which is significantly lower than the cost of new samples. However, please note that Due to its size, a self-constructed monolithic garage may not be suitable for transportation. Special equipment will be required for delivery, there is also the risk of deformation. In addition, in the process of long-term operation of the garage may shrink, making it difficult to disassemble.

The most inexpensive, but time-consuming option is the construction of an iron garage on its own, starting from the base and to the roof. When building your own hands you can significantly save on materials. If you calculate all the options for construction, then building materials can be harvested in advance, and then begin construction.

In the construction of the garage with his own hands, the owner of the car decides for himself what the future dwelling will be for his car. If long-term operation is planned, it is necessary to make a calculation in advance, taking into account all dimensions and parameters and draw up a drawing. By purchasing additional materials, you can weld a warm and comfortable “home” for your car out of metal. Depending on the place of construction and further operation of the garage, it will be useful to consider it as monolithic,and portable construction options.

When building a non-detachable garage, you should determine its functionality. Whether this building will be just a box for parking a car or a building with tool cabinets and a workbench is up to the owner. The metal structure should be installed on a flat platform, so not a superfluous will be to fill the foundation. It is not necessary to deeply deepen it, since the structure of large loads does not give.

An important nuance is the installation and fixing of embedded parts. These can be reinforcing pins or threaded anchors. To the pins by welding or threading attached lower part of the garage.

Sometimes the garage is located on a leveled plot of land. In this case, runners are used from pipes with a diameter of more than 10 cm. Inside the structure of the floor, it is necessary to fill it with a layer of gravel or make wooden flooring. In the absence of sexes during bad weather, bare ground, for example, in the form of black soil, can deliver certain inconveniences to the driver. In addition, constant moisture inside will be provided.

To solve the problem of lack of space in a metal garage can be a superstructure attic floor. After all, in addition to storing the car, storage of technical liquids, tools and things that are not needed in the apartment should be provided in the garage. In this case, the presence of an additional pantry room on top will help to free extra centimeters. Yes, and the two-story garage looks more colorful.

One way or another, the time comes when the garage needs repair. Usually flaws appear on the roof. If a leak is found in the ceiling, it is necessary to start its elimination as soon as possible, since the safety of all items in the garage, including the car, depends entirely on this.

An inexpensive option is to apply a water-based acrylic paint, which is sometimes called "rubber." After drying, this material forms an elastic layer that prevents the hostile influence of the environment.

If additional damage is found, the following should be done:

• Small cracks and holes can be sealed with tow, soaking it in front of this red-hot resin.
• Holes of large diameters are sealed with pieces of ruberoid or burlap. The surface is pre-cleaned and coated with bitumen.
• A sheet of roofing iron is superimposed on very large holes, on top of which a patch is applied. This prevents sagging of the patched area.

For the overhaul of the roof are mainly used roll materials. These types of coatings have high strength and elasticity. The roof of the garage, repaired in this way, has excellent heat resistance and moisture resistance.

Garage walls and gates sometimes also need repair. Most often this is due to the damaging effects of moisture. For non-through defects, it will be sufficient to clean and prime the damaged area, then paint over it. It is better to replace or weld a metal patch through the rusted area, having treated it with an anticorrosive compound.

Garage walls and gates sometimes also need repair. Most often this is due to the damaging effects of moisture. For non-through defects, it will be sufficient to clean and prime the damaged area, then paint over it.It is better to replace or weld a metal patch through the rusted area, having treated it with an anticorrosive compound.

In order to prevent serious violations, it is necessary to fill the space between the inner lining and the wall with liquid insulating material at the finishing stage. This will not only increase the heat resistance, but also improve the corrosion protection of the metal. It is also necessary to monitor the good air circulation inside the garage. In normal air exchange, the appearance of condensate is almost impossible.

Construction of the garage can already be considered complete after the installation of gates, locks and equipment entry. But a caring motorist will always consider it necessary to protect his car from frost or hot sun. Sheet expanded polystyrene is suitable for this, because it is cheaper and more convenient for installation.

The optimal solution to the problem can be the use of mineral wool. Mats or rolls of insulation are fixed on the walls, gates and ceiling.After completion of this stage, the elements of insulation are closed with sheets of plywood or wood board. Further, after facing inside the garage, you can start the design work.

In the garage room are usually hung shelves, small cabinets. If lighting is provided, fixtures are fixed. In the end, outside the garage can be painted with weather-resistant paint and install exterior lighting.

Building your own metal garage allows you not only to equip a parking lot, but also to acquire metalwork and construction skills. The main thing in this business is not to be afraid to try something new and always take into account all your mistakes.

Perhaps, given these recommendations, the future owner of the garage will be able to get around some unpleasant nuances:

• When making a transaction, you need to require a check, since there are known cases of the sale by fraudsters of other people's abandoned garages.
• The slope of the floors should always be in the direction of the exit, and it is undesirable to use only bare ground as the floor.
• Styrofoam, of course, cheaper and more convenient for installation, but often can react with liquids used in the car. This material also has great flammability.
• Electrical wiring is usually done prior to wall decoration to prevent accidental breakage and short-circuiting.

A car enthusiast still has to weigh all the nuances before buying a garage. Residents of rural areas, most likely, suitable brick or reinforced concrete option. The construction of a stone garage is already considered a capital and reliable structure and may be legalized as a building. With proper finishing of the premises inside and outside, optimal conditions for storing the vehicle are achieved. In such a garage you can build a viewing pit, basement, it is legal to carry out lighting and heat.

Among the shortcomings, it is possible to single out only the high cost of acquisition or construction and a smaller area for placing a car at the same allocated territory for construction.

To insulate such a garage can be inexpensive materials that do not require finishing. However, the metal requires periodic painting to avoid corrosion, and the design of such a structure will require more time.

It is seen that the advantages and disadvantages are in both cases.Defects in iron garages are easily eliminated, which makes them more popular. If the size of the budget and conditions allows, it is better to opt for a brick building. In any case, the garage should be a reliable and comfortable home for a car.

How to independently make the basis for a metalall garage, you will learn from the following video.