Bedroom air conditioner

A person in a dream spends a third of his life, so this rest should be as comfortable as possible. This is influenced by many external factors, among which the microclimate is one of the most important. You can monitor the performance of the latter with the help of various systems, among which special attention should be paid to air conditioning for the bedroom.

In the bedroom, a person often spends time in the evening and at night, when his sensitivity to irritable factors is greatly exacerbated. Therefore, when choosing an air conditioner, its technical characteristics should be selected correctly. A quality device should have the following functionality:

1. Night mode. The system during sleep should maintain the set temperature when it deviates by only 2 degrees. When cooling the room is not necessary, the air conditioner should be turned off so as not to interfere with sleep. This not only creates a comfortable environment, but also significantly saves energy.
2. Silent mode. The work of many split-systems is accompanied by loud sounds that annoy a person before bedtime. Therefore, the air conditioner noise level should be minimal. Note that when switching to night mode, this characteristic changes automatically, so there is no need for additional configuration. When buying any of the “quietest” air conditioner, test it in advance.
3. Ionization. Such functionality assumes saturation of air inside the bedroom with active ions. This allows you to simulate the state of the natural environment (waterfalls, sea coasts, etc.). It should be noted that the cost of such equipment is much higher than conventional air conditioning systems.
4. Drainage This feature allows you to remove excess moisture from the air. It is necessary to use such functionality very carefully, as dry air is not always useful, as it is very humid.

Air conditioning systems are of several types, which differ in the principle of operation. Today in the bedroom install the following air conditioners:

• Windowed. In such designs, all elements are located in the case of the window or directly below it.
• Split system. Air conditioners of this type are among the most common. They consist of two units in which air cooling is performed.

Window mechanisms have several significant drawbacks to split devices:

1. The designs change the design of the window.that affects the characteristics of the interior room.
2. Installation of a window air conditioner is only possible near a window or doorway.This device is not mobile at all. Split systems are easy to place anywhere in the room, as they depend only on the electrical network and the relative location of the blocks.
3. The power of window mechanisms is much higher with the same performance.
4. The noise level increases dramatically at night.that does not allow to create comfortable conditions for rest.

Consider how to properly install constructions of this type, since they are the most popular. Before you install an air conditioner, you should familiarize yourself with some of its location rules:

• The device must be installed at a distance of at least 10 cm from the main ceiling. This will not only ensure quick installation, but also create optimal air circulation conditions.
• Air conditioning should not be fenced furniture. All such structures should preferably be located at a distance of not less than 2 meters from the device. If this is not done, then the system will constantly overheat, which will lead to its failure.
• Split-system units should preferably be located at a minimum distance between them. This will not only speed up the installation, but also reduce the length of the route connecting these structures.
• Do not place heating devices near such products. Also, air conditioners themselves should not be placed near heating pipes and other similar heat sources. This will lead to the rapid deterioration of all elements and rapid breakdown.

The bedroom is a special room, so many do not know where to place the air conditioner. It should be noted that if you chose window mechanisms, then this question is solved automatically. Such products are often installed only in the opening of one of the present windows.

When installing split devices, you should consider a few simple rules:

1. Air conditioning is not desirable to place in front of the bed. This will lead to the fact that the flow of cold air will interfere with a person to sleep. The best solution would be a place above the bed.
2. It is not recommended to install the air conditioner in front of the front door. This will not only create uncomfortable conditions, but also affect the appearance of the interior.
3. If the air conditioner is located in the children's bedroom, the flow direction should be set at 7-15 degrees relative to the ceiling surface. Many experts recommend the use of systems that blow only upwards. This will eliminate the occurrence of drafts.

Once you have decided where to install the equipment, proceed to its installation. The installation algorithm involves several sequential steps:

• The external unit is installed first. For this, several holes of a certain diameter are made in the wall. At the same time, it is important to hang it under a slight slope so that the refrigerant circulates in the system with high quality.

• The next step is the installation of the indoor unit.. Often it is hung on special brackets. After this, the tubes that connect both elements are brought to this part. It is important to flare all the ends correctly in order to ensure a tight joint. To do this, use special mechanisms, which include a cone and a vice.
• Completes the process of checking and configuring the entire system. It is important to check all the operating modes of the air conditioner to eliminate the likelihood of leakage.

How to make a powerful air conditioner for the room, see the following video.