Installing vertical blinds

Installing vertical blinds - the process is quite easy. If you know step by step installation instructions, then do it yourself will not be difficult. Moreover, vertical blinds have long been not just an accessory in an office space. They firmly entered the living rooms of most apartments. Fabric types of blinds help to create additional comfort and quite practical.

Vertical blinds, as the name implies, are a simple and convenient light-protective construction consisting of longitudinal vertical plates.

From horizontal distinguishes them:

• More aesthetic appearance. Horizontal blinds, rather functional, while the vertical decorative;
• The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are designed for minimalistic decoration of small windows.Vertical models have different widths and easily cover the area of ​​large windows, arches and doorways.
• A variety of materials. They can be wooden, aluminum, bamboo, plastic, woven and non-woven fabric, mirrored, blackout, and thread. The abundance of options provides another advantage - the variability of colors and textures;

• The modern and original design of a window opening more opportunities for design;
• Simplicity of control mechanisms. Perhaps both mechanical control and electric;
• The ability to place on the "curtains" photo printing due to the greater surface and material characteristics;

• Practicality. Larger slats are easier to wipe and dust when needed, which occurs infrequently. If in case of heavy pollution, for example, in the children's room, the lamellae still need to be subjected to hygienic procedures, it will not take much time - they can be washed on the hands and in the washing machine;
• Possibility of installation on non-standard windows (triangle, trapezium, arch, bay window);
• The design is subject to repair. To replace a particular part, you do not need to call the wizard,it's easy enough to do it yourself. You can replace the slats one by one without having to dismantle the entire structure.

At a glance, vertical blinds look like a series of longitudinal plates of thick fabric or rigid materials attached to the eaves. They move sideways, going behind each other and forming a narrow strip that resembles a curtain.

They consist of the following elements:

1. The bearing eaves on which the curtain and decorative eaves (gruver) which plays a facade role is fixed.

2. Sliders for mounting slats.

3. The luminaire or “hangers” are devices that connect the vertical plates with the supporting eaves.

4. Weights, weighting the canvas.

5. Connecting chain running along the bottom edge of the slats.

6. Control circuit for turning the plates to different positions around the axis.

7. Control cord with a sinker - for the ability to move and push the curtains.

8. Actually, the lamellae are vertical plates that form the light-protective canvas on the window.

Fittings and components: ceiling bracket, bracket for groovers, fasteners, angles, latches, stoppers and c-clips, rings on the rod, chain locks, replacement parts. Description to the components is in each instruction. The design may vary slightly depending on the control mechanism.

There are three types of fixing blinds: to the wall, to the ceiling, directly on the frame, and two ways: with drilling and without drilling. The universal basis of any fastening is a cornice, which is fastened to the wall, frame or ceiling in various ways.

It is carried out with the help of screws, brackets, on which the cornice, fishing line is installed. Additionally, you need a pencil, ruler, drill, screwdriver.

First you need to make a markup in those places where the brackets will be located. For reliability and accuracy in the marked places it is necessary to drill holes for fixing. Then, applying the brackets in turn to the PVC frame, fasten them on the markings with a screwdriver. Next, a cornice is installed and the entire structure is assembled.

If in the future we plan to replace blinds or other options for decorating the window, it is not recommended to damage the plastic windows. The holes of the screws will remain in the frame forever and significantly spoil the appearance of the windows.

The brackets are then mounted in two ways.:

• for the upper part of the PVC profile on the opening flaps (you can just hang like a hook);
• on double-sided tape, which can be glued, without fear of leaving marks.

A special approach requires mounting blinds on the balcony. The important role here is played by the balcony structure. The type of glazing depends on the choice of certain blinds and the method of their attachment. In general, almost all options are available for balconies. Particular attention should be paid to the sight of blinds, since not all of them are universal for different types of windows. For example, for a balcony with sliding windows, horizontal blinds are not suitable, as they can be deformed during operation or due to strong wind.

On how well the measurements are made depends on the final result.Even expensive beautiful models will not look good on the window, if there are gaps in the opening or the edges of the slats constantly bully the wall.

It is important to pay attention to the following points:

• For the most accurate indicators used steel tape;
• It is impossible to round the received figures, accuracy should be observed to millimeters;
• When ordering blinds width parameter is indicated first, length - the second;
• Not a single window opening has absolutely perfect geometrical shapes, therefore measurements must be made upwards and outwards in width at least at two points.

When installing in the window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value. For wall mounting to the wide side of the slope, you need to add at least 10 cm. The length of the slats can be any, but from the edge of the blinds to the floor it is recommended to retreat 2 cm. per 100+ mm.

Vertical blinds are the most convenient way to decorate a window for independent execution. They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade. The brackets on which the structure is supported are fastened with screws, hung or glued to double-sided tape. Special adhesive tape, despite the apparent impracticality is fixed very firmly, so it is important to correctly apply the markup for the installation of brackets. After it is glued, it will be very problematic to move it.

Assembly procedure for vertical blinds:

1. Preparation tools. You will need: a ladder, a set of self-tapping screws, a building level and drawing accessories, a drill, a screwdriver.
2. Drawing a pencil marking for installation of arms. For reliable fixation of fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
3. Mounting brackets in a suitable way (with or without drilling).
4. Installation of the eaves.
5. Install slats. To do this, pull the control cord,on which lamella mounts are located so that they are in the correct position. Then fix all the slats on the hooks of the mountings.

Installation work on the design of a non-standard window requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features.

Installation of blinds begins long before the preparation of the working surface and a set of tools. The first step of this process is a weighted decision about the type and type of blinds, material, color and texture depending on the functionality of the room. So, it is better to choose vertical blinds for the living room, which let in light, for the bedroom automatic electric roller blinds made of blackout fabric, and for the kitchen, where cooking smells and food products are constantly burning - plastic blinds that do not absorb fat and dirt.

The second important point is the correct markup. Much if not everything depends on it, including how easy the installation process will be. If all the features of the architecture of window openings will be taken into account by experts when ordering blinds from them, everything will go smoothly and easily without the help of professional installers.

Installation of blinds should be made in accuracy with the markup and subsequent verification of the functionality of the structure. Here the most important point is the choice between the mount with drilling and the mount without it.

It is also necessary to provide a type of control. For low windows an excellent solution is one of the types of mechanical direction.

Then you can see the step-by-step instructions for installing vertical blinds.