Mattress with independent springs

Modern rhythm of life is full of stress and anxiety. At the same time, it is not surprising that people strive to find an ideal place to relax, allowing them to recover from a hard day. A mattress with independent springs can be the perfect sleeping place.

A mattress with independent springs is a design in which each spring, and sometimes two springs in one, are packed in individual textile cases. They do not in any way interact with each other. To create a solid mattress design with a spring block, the covers themselves are fastened together. As a result of such manipulations, an orthopedic effect is created, where each part of the body is supported to the necessary extent.

It is the use that distinguishes dependent and independent springs. In the first case, called "Bonnel springs", Conical springs are interconnected by a thin wire, which implies the subsidence of all the springs under pressure on one. The body in such a bed during sleep seems to be in a hammock in a half-bent state. Needless to say that health can hardly be preserved in this way. This is the main difference with TFK mattresses, while resting on which the body is in its natural position.

The number of springs in the mattress directly affects the support of the body during sleep. By the way, in Bonnel springs there are only 150 pieces per square meter, while the number of independent springs varies from 250 to 1000 pieces.

The most popular and affordable option is considered a standard independent block TFK. In its arsenal is from 220 to 300 springs per square meter. It is worth saying that 300 springs can be found in a special kind of springs Coopercoil.

However, 300 springs are not the ultimate dream. So, the spring unit "Multipocket"Can be from 500 to 1000 pieces per square meter. Achieve such a dense placement of support elements by reducing their diameter, which is from 2 to 4 centimeters. This design is called anatomical, because it is more concerned about healthy sleep and proper support of the whole organism.

In addition, in the catalogs of some manufacturers, you can see the spring blocks Dual springin which one supporting element consists of two springs - internal and external. On apt. meter block accounts for 256 external springs and 128 internal. The latter provide reliable support for heavy weights from 100 kg and up. Also, this design is ideal for couples who are in different weight categories. It is worth saying that many companies have abandoned this support scheme because of its high cost, and because of its low popularity among buyers.

In addition to the spring block, each mattress has many other characteristics. First of all, mattresses are divided by hardness, ranging from soft and moderately soft, to medium hardness and hard models.A hard mattress with springs is possible only with a correctly selected upper and lower filler, which is also one of the main characteristics.

Also, the mattress can be for children, adult, double or euro. The size of the bed, its width and length depend on this category. And another important characteristic is the height of the mattress. For an adult, the optimal value is 16-18 cm, however, according to experts, the higher the mattress, the more comfortable it is.

It is an important criterion in the choice of mattress and maximum load. In soft models, it is no more than 100 kg, while mattresses of moderate hardness withstand up to 165 kg and above.

Additional features include a mattress cover. The material from which it is made, is designed not to cause allergic reactions, to be resistant to pollution and have a high service life. Only natural fabrics, such as calico and cotton, meet all these criteria. Knitwear is slightly inferior in quality, but serves as a decent, but more budgetary alternative.

It is unlikely that someone will agree to sleep on a clean spring block, and therefore modern mattresses complement the upper and lower layers with different fillers. For example, the latex top layer made of sap rubber tree is popular today. This plastic and elastic material has excellent ventilation and additional orthopedic effect, while not absorbing odors and moisture. Wanting to get a soft mattress, experts advise to stay on the latex filler, manufactured by the method of Talalay. If the goals are pursued opposite, a good choice in favor of a hard mattress will be latex Dunlop.

Another good surface layer is wool. It is ideal for the winter side of the mattress, warming with its warmth and pleasing with naturalness.The disadvantages of wool include its ability to quickly absorb liquids and retain odors, and therefore such a surface is unlikely to last a good and long service in cribs in the absence of a protective cover.

The most budget layer will be polyurethane foam with its usual density and softness. The foam rubber of the new generation supports the body well, which makes it quite a worthy option for sleeping.

Today, manufacturers produce mattresses in all popular sizes and are happy to release those that are not available. The allowable gap between the bed and the mattress can not be more than 4 cm. The larger size of the mattress does not take place at all, because such a surface is instantly covered with folds and irregularities that prevent healthy sleep.

So, choosing a sleeper in size, it is important to adhere to the following rules:

• the length of the bed should be 10-15 cm longer than a person's height;
• the width of a berth per adult person is 70-80 cm.

By relating these characteristics to popular sizes, one can calculate the ideal parameters of the mattresses.Thus, the size of 90x190 will be a spacious single place for an adult. Parameters of 160x200 cm will please the family bed with space, and 140x200 cm will be a good option for two in a small room.

A sleeping place with the parameters 125x65x18 cm is suitable for a newborn baby and up to the age of three. Children from three years old to early adolescence will be comfortable on the surface of 160x80 cm. Older children may need mattresses with a sleeping area 90 or more centimeters wide.

The thickness of the mattress can be high or low. Models with independent spring blocks, as a rule, start from a height of 14 -16 cm and end at 28 cm. The rule here is that the higher the better, however, a 16 cm mattress can give a good orthopedic result.

Thinking about buying a quality design with an independent spring unit, many have a transportation problem, because such mattresses weigh a lot. Having decided to purchase, you should study the weight in advance and be ready for transportation.

So, a single mattress with independent springs weighs from 10-20 kg, one and a half-sleeping - 20-35 kg, double beds reach 45 kg.Such wide ranges depend on the layers of the structure. Mattresses with latex and coconut layers are considered the heaviest.

Leading Russian manufacturer "Ormatek»Presents a wide range of mattresses with an independent spring block of various classes. So, among the options Economy is a model "Erie", Having in its arsenal 175 springs. For the required rigidity of such a number of springs is not enough, and therefore the mattress is considered soft and designed for weight up to 110 kg.

Another budget option presented the company LLCMatres Group"By creating a mattress with an independent block and a layer of latex"Alliance". Artificial latex and synthetic materials in the manufacture provide the product with a reasonable price with good consumer characteristics.

The mattress is popular today.Caliope"With multipacket springs." Its naturalness achieved through the use of coconut coir and jacquard cover, as well as moderate hardness meets all the requirements of consumers.

Represents a wide selection of another Russian company. Askona with many years of experience presented the economy class mattress "Alfredo"With increased independent springs, polyurethane foam as the base and felt.

Remains relevant mattress "Plato" from company "Toris", Equipped with 700 springs and latex coconut fiber. The design is characterized by moderate rigidity.

Among the children's species, the mattress stands out “Alpha"With springs, coconut fiber and strukttoform. A cover of 100% calico is performed in a children's color theme.

The choice of mattress should be based on the following criteria:

• bed berth depth;
• weight and weight of the owners;
• the age aspect - young people should be given the advantage of rigid structures;
• the naturalness of the fillers in the presence of allergic reactions;
• exact parameters of the bed.

The average cost of a double standard mattress with a number of springs in the range of 220-300 per bed is 8,000 rubles. Multi-packs are in a higher price category, the lower bar of which cost is around 14,000 rubles.

In order to preserve all the useful properties of the mattress when it is not used, it is important to ensure that it is stored horizontally away from sunlight and heating appliances.

With regular use, experts advise turning the mattress 2-4 times a year. This procedure will help restore the elasticity of the springs.

Opinions about independent springs please with their positive. As most people of all ages point out, it is comfortable to sleep on such structures, and waking up is easy. Top mattress rating according to reviews includes products such as Relax Francesca and "Promtex Soft Biokokos". Also a large number of reviews devoted to mattresses "Toris" and "Dreamline".

In the next video you can see the test of independent springs "Pocket Spring".