Corner beds with lifting mechanism

Very often, the lack of free space makes people resort to certain tricks during the selection and placement of a particular furniture. Recently, beds have been used not only as beds, but also as objects where things that are unnecessary in everyday life can be stored. Many furniture manufacturers equip their beds with special drawers where compact items can be put. Angular beds with a lifting mechanism that allow you to use all the space under the bed - with drawers, are perfect for storing larger items.

Corner beds are neatly built into any corner of the room. They can be of several types: it can be a bed with a corner headboard, a round corner bed, a nursery or a bunk bed, and also a corner transforming bed. All of these models, complemented by a lifting mechanism,can become not only a beautiful sleeping place, but also practical, useful furniture with additional storage space.

The great advantage of such beds is the convenience of their location, as well as practicality, because there is never enough storage space. As a rule, such models are very durable and delight their owners for years. Access to the lower section is very simple: just raise the bed, fix it and get it or put the item you need.

Most often, these pieces of furniture have their own bottom, so that the things hidden inside are not covered with dust or spoiled. Some models are equipped with automatic lifting of the bed, which is very convenient. Dimensions of angular beds with the lifting mechanism are very suitable, they will perfectly fit into any room. As a rule, companies produce them in three sizes: 90 × 200, 140 × 200 and 120 × 200 cm. These are universal products that can be placed in any room. Models are easily assembled and disassembled, and also take up little space during transportation.

There are three types of lifting mechanisms, each of which has its own advantages and disadvantages:

1. Spring mechanism – the simplest and inexpensive, but at the same time it wears out pretty quickly.
2. Modern gas more expensive, but it is more durable and reliable.
3. There is also a third type - manual, but there will need to be more effort, one hostess in this case is unlikely to cope. But it is inexpensive and serves for a long time.

However, this furniture has some minor drawbacks. For example, the cost of a corner bed with a lifting mechanism is slightly higher than that of simple furniture. Putting under the bed things that should always be available will not work, since raising and lowering the mechanism (and then also re-filling the bed) is not always convenient.

Collecting these models is not very difficult, but still the process has its own nuances. In this case, it is better to seek the help of professionals. If you are going to build yourself, consider certain recommendations:

• Planning to proceed with assembly, you need to get all the parts out of the package., make sure they are in good condition and have all the components. When everything is ready, get to work.
• First, the base is assembled. The partition, the upper and lower parts must be attached to the side with euro-screws 6 to 50. Next, you should attach the lateral tsarg to the headboard and upper tsarg. In this case, euro screws 6 and 70 will be needed. A tsarist belt is installed on the entire inner part of the base, and then the bottom must be inserted. All parts must be carefully fastened with screws and check for strength.

• Next is the installation of the lifting mechanism. To begin with, the bearings are installed (at the bottom). Then you need to attach the frame itself to the body, then - all carefully fasten. Then the gas lifts are put on the mechanisms and carefully fixed with washers, which at the very beginning need to be screwed all the way in - and then slightly pulled back. When you make sure that the frame and mechanism are securely fastened, begin the process of mounting the lamellae.

• When everything is ready, do not rush to immediately put the mattress. First you need to raise and lower the mechanism several times, make sure that it is strong and there are no loose parts. Only after that it will be possible to safely equip a sleeping place, to make it.

How to assemble a bed with a lifting mechanism, see the following video.