How to quickly fill the blanket in the duvet cover?

Not everyone can quickly fill the blanket in the duvet cover, some spend a lot of time on it and eventually get confused in bed linen. In addition, not all duvet covers have a large slot from the top or bottom edge, most of them have a small hole in the side, in which a large duvet is sometimes too difficult.

There are also often problems with children's blankets, because for them the opening is sometimes too small, and for adults with large hands this is a very difficult job. Such household things, which, it would seem, are mundane, take a lot of time and even nerves from some. Therefore, it is necessary to know how to simply and correctly fill the blankets in any duvet covers.

Everybody can put this product through the corners on the blanket, and alone. You only need to familiarize yourself with the step-by-step guide once, and after that it will be very easy to do it:

• First you need to take a clean ironed duvet cover and turn it inside out.
• After that, the hands should be placed in the inner part of the duvet cover, which in our case is the front one and find the upper two corners there.
• After it is necessary to push your hands into these corners, as if putting them on the cams, as if you are stringing a rag doll. The main thing is not to confuse the inside and outside of the duvet cover and the suitable edge of the blanket.

• Next, you should take in your hands, on which the corners of the duvet cover are strung with the second product and thus combine the two upper corners of both objects. From what angle you should start will depend on which side the slot is on the product.
• It’s necessary to hold each corner with your hands very tightly, since in the future you will keep both of these elements on the weight completely, and it is important not to lose the correlated angles.
• Then you need one movement sharply turn on the front side of Monday, throwing it in such a way on another product.
• After that, you should gently whisk the blanket. This can be done by shaking it with your hands.

It is important that the product rolls down and the blanket in it is completely finished.The easiest way to straighten such a blanket, spreading it on the bed. After that, you must carefully close the slot or fasten a zipper or button on it. This is a fairly simple way that takes literally 5 minutes. Such a life hack is one of the most popular in this business.

You can slightly push one product into another through the corners:

• To do this, you must fully stretch the duvet cover and lay out the straightened second product next to it.
• Then in one hand it is necessary to take the corner of the duvet cover, and in the other - the two upper corners of the blanket and shove one into the other.
• It is necessary to look outside for two necessary corners inside and bring them to the edge of the first product, then this process must be repeated with the lower part of the blanket. So it will be easily inserted, it will remain only a few times to shake, so that it is evenly distributed inside.

The easiest way to fill the blanket in the duvet cover through the top slot. Usually it is quite large and has a button or zipper closure:

• In this case, it does not matter how it will be located when you want to put it inside.It is important that only the second product is flattened.
• Thus, you just need to place one product into another, grope inside the top two corners and shake it, holding it from the side of the opposite slot.
• So you need to roll out the blanket inside, and then, having taken hold of the lower edges, it will need to be whipped several times so that it is completely flattened.
• Then it is only necessary to fasten the slot and once again shake the two corners of both of these products adjacent to it so that they finally flatten out. This is the fastest way to refuel.

There is also another way to help you ease the process. It is suitable if you have the opportunity to wear Monday together. The four-hand method is the easiest and fastest:

• Initially, you need to completely straighten the blanket, spreading it on the bed. It is important that it is not twisted or badly whipped.
• Then, after you evenly distribute the filling inside it, it is necessary to push it into the duvet cover slot, and it is better to do this with every corner in turn, inserting it into the corresponding corner of another product.Thus, at first one person inserts the necessary corner into another product, and the second one outside fixes it with the other hand, and so it is necessary to repeat with each corner.

• When all four corners are put on, you need to take the duvet cover by all four corners, while holding the product inside, stretch it together for two different opposite edges and shake it several times so that it lies flat inside.
• Thus, this problem will be solved very quickly. The main thing is to choose the right size of the blanket and duvet cover, otherwise it will not work to insert it evenly, it will often fly out and get confused inside.

Before proceeding to the use of this method, it is necessary to make sure that the sizes of these two products are consistent.

A rather unusual and interesting way that many people now use is putting on a duvet cover from the inside in the form of rolling two products into a roll:

• Initially, you need to compare these two products and compare their size, if it matches, then you can proceed to further action. So, you must first take and turn out the duvet cover on the wrong side and place it on the bed with the hole down.
• It should be properly smoothed and straightened so that there are no irregularities and folds.
• Then you need to put a blanket on top so that it completely covers the first product and each corner overlaps the other.

• After that, you need to take one of any angles to choose from and start twisting these two products together in a roll from top to bottom, reaching the middle, and you only need to stick at one angle.
• After that, you need to take the opposite corner and start to twist these products in the other direction, from the bottom up to the middle. Thus, you will have two parallel rolls that connect in the middle. It turns out that the hole, which is necessary for inserting the duvet cover, is under these two rolls.
• Then you should take each corner from one side and alternately turn each of them to the wrong side through the cut of the product.
• After it is necessary to roll out the roll already inside and shake the blanket over the two corners, so it will be very quickly and easily inserted into another product.

There is also another way of turning the blanket over by the roll method:

• In this case, the product hole is located on the bed not at the bottom, but at the top. It spreads out the second product and rolls up on both sides with a roller to the middle, as it was in another case.
• After that, it is necessary to gently insert the two inner ends of each roll into the duvet cover slot and start rolling them away from you.
• Then each corner of the blanket should be inserted into the corner of the duvet cover and pulled apart in different directions, straightened in the hands. Then you need to shake it slightly.

• Also roll up and roll up a little differently. The linen should also be turned inside out and spread out on a bed; a blanket should be placed on top of it.
• Both of these products are then gently wound into one roll, and it is necessary to move from the opposite end of the duvet cover, on which there is no hole.
• Then, the resulting structure must be turned inside out so that it is completely finished inside.
• Then, the resulting "sausage" you just need to unfold and the blanket will already be inside, and it will be completely fixed. It is very convenient and fast.

The following method of donning is suitable only for those duvet covers that have a large slot, with small holes, this is rather difficult to do, since it will take much longer. The method is quite simple:

• In the wide opening on the side, carefully place the entire blanket, without first straightening it. This way you will save time on preparing the blanket for this process.

• Next, you need a little whip these two combined products, grope inside the two corners of the blanket and gently lead to the outer two corners of the other product from the inside, then you need to grasp the two corners and shake the blanket several times to make it smooth.
• After that, turn this product over with the other side and push the two lower corners in the appropriate direction, and then grab them outside and shake the products again. Thus, both of these things will be straightened out and will lie down very smoothly and accurately.

A very similar method of donning for the wide-slit version is the following method:

• First you need to turn such a duvet cover inside out, then put a blanket in it and turn it back on its front side with it.
• Next, you need to act similarly to the previous method, grope for the corners and then gently shake these products.

For visual instructions on how to quickly fill the blanket in the duvet cover, see below.