Belorussian entrance doors

The door is not just an element of decor. This heat and sound insulation, as well as protection of the house from unwanted interventions of the world. An excellent choice that meets all the above requirements, meets the products of Belarusian manufacturers.

For the manufacture of their products, manufacturers use metal sheets with a thickness of 2 mm, made of high-alloyed factory steel. That is, it contains additional components (up to 50%), such as nickel, chromium, copper, and others, which increases strength and resistance to deformation and corrosion.

Thickness not chosen randomly. It corresponds to GOST 31173-2003, according to which this value for steel door products must be at least 1.5 mm. 2 mm is ideal. Door leaves made of metal sheets over 2.5 mm wide are quite heavy, so problems may arise with their installation; for children and the elderly, they can create difficulties in operation. Sheet thickness less than 1.5 mm is an excellent entrance gate for thieves. Such a door can even be opened with a knife.

Door blocks of Belarusian manufacturers are fastened with hidden hinges. They are quite difficult to detect. This is a trap for burglars, as they often try to get into someone else's abode, removing them from the fasteners. But if, after all, the thief was lucky to discover these loops, it is simply impossible to remove the door from them. This is opposed by anti-skid barriers.

In order to increase the heat and sound insulation, a layer of linen or mineral wool is laid between the metal sheets of such doors. It is resistant to ignition, hygroscopic, low shrinkage, resists fungi. It is an eco-friendly and durable material that puts products from Belarus several steps above the foam, most often used by manufacturers from other countries.

To further increase the security of their doors, manufacturers use lever and cylinder locks:

• Suvald locks - These are locks consisting of several plates. Opening, they are pushed by prongs on the key. These locks have a high degree of protection due to the replaceable secrecy of the key, armor steel, a system for responding to master keys, false grooves in the springs. A spring cylinder will help with burglary;
• Cylinder - secret locks with a cylinder inside that turns only when using its own key. In more complex models, in order for the mechanism to be activated, a key is inserted, it scans it, which allows you to open it with only one key.

To make their doors attractive not only in quality but also in appearance, manufacturers offer several options for finishing their products:

• Laminated HDF panels - These are plates made of pressed wood under high temperature under high pressure. They are dense, have insulating properties, and any decor is easily applied to them;
• MDF panels with PVC film light-resistant, not afraid of moisture and temperature difference, withstand mechanical stress;
• MDF panels covered with oak veneer or Vironait-film with a patina effect:Veneer is a wood plate with a natural pattern. It is fixed to the base with glue. Thanks to this slab, doors acquire various shades. The veneer will not allow the door leaf to be distorted and will help resist moisture. It also has insulating properties, withstands various temperatures.

Belarusian entrance doors are a union of beauty and quality. They are durable, moisture and corrosion resistant, have fireproof properties, have several levels of protection against burglary. Due to its thermal insulation properties, it creates a warm atmosphere in the house. Door blocks are internal and street and successfully limit the entrance not only to the apartment from the entrance, but also to the private house from the street.

As for the design of door panels of Belarus, there is a wide range here: from fancy carved canvases to concise and unobtrusive classics. There are also models in the ancient Roman style and modern style. But all of them are united by elegance and elegance of execution.

The price of the doors of Belarusian manufacturers, given their components, is not the lowest. But the quality is worth it. All products are certified and comply with European quality standards, thanks to which they entered the world market.The leading Belarusian door leaf companies are “Doors of Belarus”, “Istok Dors” and “Khales”. Their assortment includes not only entrance doors, but also interior doors.

Based on the opinions of consumers about the Belarusian doors, several conclusions can be made:

• When buying, request a certificate of quality. When ordering online, use only official websites and beware of fakes. This threatens marriage in the product and reduced service life.
• It is important that professionals install the door. After all, the wrong door can lose some of its qualities. A claim will be made to the manufacturer;

Discover the world of Belarusian doors. This is beauty and quality, sophistication and strength.

You will learn more about the Belarusian entrance doors in the following video.