The better to cut the laminate?

In the process of laying the flooring, namely laminate, it is important not only to be able to correctly connect the panels together. It is also necessary to correctly measure the size of the panels in accordance with the area of ​​the room, and also not to disturb the traditional laying in a checkerboard pattern. In such a situation, the question arises - what is to cut the size of the measured panel? Let's try to understand the situation.

The choice of tools for cutting laminated panels depends largely on the type of lamella used. If laying of the floor is intended independently and without the help of specialists, then It is better to pay attention to the soft types of laminate.

To cut this type of lamellae, you do not need a special tool, it will be enough to arm yourself with an ordinary ruler, a pencil or pen and a construction knife. First, the cutting line is marked with a pencil or pen, and then it should be drawn along with a knife. After that, you just need to bend the canvas. If you need to make a figured incision, then for this action you can use large-sized scissors.

However, for sawing other types of multilayer panels, which include high-strength fiberboard or particleboard, you need to choose more serious tools.

When choosing a tool that is supposed to saw laminated panels There are several factors to consider:

• The tool must be easy to operate and not cause discomfort. It depends more on personal preferences and treatment skills.
• Compact and light objects are much easier and faster to wield, and during the repair every minute counts.
• One of the most important of all points is that with the help of the chosen tool you should get an even cut without chips or cracks.However, you should not over-focus on this factor, since minor irregularities will quietly disappear under the plinths.

After reviewing the main characteristics, you can proceed to a more detailed study of tools for cutting laminate.

One of the easy-to-use tools that you can use to cut a lamella is electric jigsaw. The device has a small weight and even a teenager or a girl will quickly figure it out. Jigsaw runs at high speeds, so the cut is neat. One of the important factors when using this device is the correct choice of files for the jigsaw. Modern models are usually equipped with special replaceable files for working on laminate. They differ from other files of a file in a form, an arrangement and the size of teeth. However, in the absence of specialized nozzles, narrow files with fine teeth are suitable for cutting metal products.

To cut the required pieces of laminated panels is quite suitable guillotine. Unlike the previous device, the guillotine has a mechanical device. In appearance, it can be compared with large scissors. This cutter is silent, uncomplicated and accurate in operation. With it, the easiest way to produce transverse cutting of the laminate, but to buy a cutter for repairs in the apartment would be inappropriate. Such a device is suitable for those who are professionally engaged in laying flooring, so it can be found for temporary use with friends repairmen.

To cut the slats with professional machine, you need to lay the panel on the support of the guillotine. Then adjust the blade so that the mark for the cut is aligned with the cutter blade. After that, you need to lower the handle of the guillotine, cutting off exactly and neatly necessary piece of the panel. To obtain an even cut when sawing laminate, you can use a circular.

To work with circular it is necessary to lay the laminated panel face up and securely fasten it. During work, you need to act carefully, pressing a little while moving the disc and not lingering for a long time in one place. Also, do not forget about the basic rules of safety: the sleeves of clothing during operation must be fastened, and hands must also be protected.

Another tool that requires work skills is frezer. Manual construction with replaceable cutters hardly lies in every house, but it can be found out by those who professionally assemble furniture. The milling cutter is able to leave behind itself a perfectly flat and smooth surface, besides with the tool you can cut out various shapes.

Sometimes the assistant when cutting laminate can be ordinary construction knife. It can be used with small amounts of work, for example, for cutting one or two panels, when there is no time to look for another tool.

When using a knife, you should put the laminate face up, then make a knife a deep cut in the marking area. Then, holding one side of the panel, you need to press on the other part of it to the extent that it does not break at the place of the cut.

Often, when working on the display of laminate, a popular tool such as hacksaw. However, for effective and fast sawing of panels, you need to choose its correct model. Of course, in the absence of others, you can use a hacksaw. But in this case, the process will be time consuming, as a hacksaw has large teeth. Due to these features, the hacksaw will not carefully cut the blade, but dig into it.

However, it should be remembered that the help of hacksaws should be resorted to only with small amounts of work. Unlike power tools, this takes more time to cut and requires great effort, so professional builders do not use a hacksaw for this purpose.

This tool, which is also called an angle grinder, is excellent for sawing various materials, including laminated panels. With this device you can get a smooth and neat cut. To properly cut the laminate grinder, you need to lay the panel decorative side up, and also to use special replaceable disks with small teeth for work on metal, ceramic surfaces or concrete.

Since during work with an angle grinder a large amount of dust and dirt is generated, and you can feel the unpleasant smell of burning in the process of sawing, it is better to perform all manipulations outdoors. On the first floor, you can stretch the extension through the window and work on the street, on the upper floors you can fit the unglazed balcony.

Another nuance when working with a grinder, as well as in handling a circular saw, is to have at least a little experience with this tool. Uncertain handling of the hand during sawing can lead to the formation of an uneven edge, or it can break at all.

Sometimes there are situations when it is necessary to trim laminated panels that are already laid on the floor. Usually, people with insufficient experience in construction work in this case are wondering how to do it correctly.

According to reviews of people who have encountered such a problem while laying the flooring, the best option in this case would be the decision to use the grinder. At the same time, according to the advice of experienced users, it is necessary to install a disk on the device for working on a diamond-coated tile. When performing work you need to be extremely careful and move the tool all the time, without clicking on it with special effort. During operation, the grinder must keep his finger on the start button all the time so that in case of loss of control over the situation, turn off the device in time and avoid injuries.

In addition, you can turn to a safer, but at the same time time-consuming method - using a cutter. In order to cut the laminate laid, you need to equip a professional cutter for woodworking. According to the advice of experienced people, you need to make two parallel cuts across the width of the narrow chisel, then select the cut piece with a chisel.And so slowly to remove the length of the panel to the desired size.

In order to carefully saw off the laminate of the required length, you need to carefully prepare for the start of work.

Initially, you need to decide what kind of tool from the above described work will be performed. And it is necessary to be guided when choosing not only the availability of the device, but also the existing skills of handling it.

When measurements are made, and the cut is marked with a pencil, you need to draw a flat line along which the laminated panel will be cut.

When all the preparatory work carried out, you can go directly to the process of sawing.

Usually laminate panels are cut across to remove length. But sometimes there are situations when you need to cut the lamella along.

In this case, it is better to use electrical appliances,since even a professional laminate cutter is designed for cutting across the panel. The best assistant for solving this problem will be a jigsaw. It is with his help, even without having special skills of handling the device, you can easily trim the panel around - both along and across.

The fact that it is better to cut laminate, so that there are no fragments, see the following video.