Pools for gardening: subtleties of choice of designs

Almost every villa owner, who often happens on his plot, wants to install a pool there. But often the choice leads to a dead end, it is difficult to determine the specific design. That is why you must first examine some of the nuances of the choice of country pools, only then decide on the most appropriate variety.

Swimming pool for summer house is an excellent solution, because it can save on a hot summer day. So, you can refresh yourself at any time, being at your summer cottage in hot weather. In this case, you do not have to go to the river or in the shower: you can swim in your own pond located in the summer cottage. Mostly small-scale models are installed at the dacha.

If you visit the summer cottage only in summer, then the purchase of an inflatable pool will be a great solution for you. But such designs are best suited to just dip, not swim.If you like to swim, then you have to take care of installing a frame or deep country pool.

A large suburban pool will help not only to relax and provide an opportunity to swim, but will also become a central element of the landscape design of the site. A feature of the design is that it is given a great importance, decorating in all possible ways, because The pool should harmoniously fit into the landscape design. Such designs complement the flower beds and flower beds.

Above the pool you can make a carport. It will thus be closed from the bright rays of the sun and from the wind, which can blow there foliage and other debris. But inflatable mini-models have no canopy or roof. In them, the water is heated from the sun. That is why before you swim, you need to draw water and wait until it warms up.

Another feature is that they often perform a decorative function. That is why many prefer compact small models. They incorporate a system of constant circulation of water, a fountain and other interesting elements.

The pool can serve as an independent element of the decor even at night: you can install a backlight in it, which will set it apart from the rest of the landscape design elements. In addition, you can spend parties in the country and have fun with friends.

Suburban pool is used for children. There you can leave the children to rest so that they do not interfere while you are doing your business. Moreover, these pools are completely safe.. You can choose a model suitable for your child's height and age.

The choice of specific structures usually depends on who will swim in such a pool, as well as on how long you plan to use it.

There are unusual street closed systems. So, it can be driven in or frame models that have a roof in the form of a greenhouse on top. Thus, some even use this structure for bathing in the winter, having spent heating there.

The material from which the country pools are made depends on their design. So, often used to create plastic. But the plastic pool has several drawbacks: it is fragile and non-frost resistant. Usually, plastic designs are small in size. They are quite inexpensive, but they do not serve as long as other models.

Another option is models from polypropylene. This is a dense high-quality material that is not exposed to temperatures and their drops. They are more expensive than plastic models, but the design has been serving for more than 10 years.

Popular also composite models. These are the highest quality and dense options that are often used to create a frame. They are frost-resistant and not subject to external influences, including mechanical. Composite materials cannot be scratched, usually acrylic models.

There are also metal models. As a rule, these are products whose frame is made of metal. The frame pool is made of polycarbonate. It is less reliable, but more attractive in design.

You can also find models whose design is bowl-shaped plastic container. Inflatable pools are polyethylene or rubber. These are thin and unreliable materials, but they are great as an option for baby bathing.

Most often, when talking about swimming pools, they imply a rather large structure, which is a frame concreted in the ground. But it is massive and difficult to install and operate. That is why manufacturers produce many other more budgetary and easier to design and install options that everyone can afford. This especially applies to summer outdoor pools. So, there are three main types of summer pools.

This is a small rubber pool. It is a compact and convenient option. It can be carried as it is easy to blow off and compactly folded. In addition, it can be removed during the cold season and even brought into the house. But mostly these are models for children or for a small group of adults. The smallest - inflatable pools for kids.

But larger inflatable pools are presented for adults. They are deeper, more voluminous, and, accordingly, more expensive.And they can be of almost any shape, but the most popular are oval and round designs. The main advantage of this type of pool is its cost. This is especially true for models of small and medium size.

In addition, these designs are different in that with their help you can organize yourself a bathing place at any time when you want it. It will be enough just to inflate it and fill it with water, and then just blow it off. When the pool is not needed, it is blown away, and it does not take up extra space.

But this option is not very reliable. It is easiest to damage them, especially if there are sharp twigs and stones on the ground. Since it is made from not too strong rubber, it can break, and the whole structure will become unusable due to a small hole. Besides, this is not the most beautiful and solid model. Although manufacturers are now and very impressive and large in size model for holiday cottages.

Installation of the pool may take you some time. Inflate it yourself will be difficult. For this you need to purchase an additional pump. If you accidentally break it, then inflate the pool in another way will not work, the design will be temporarily unsuitable. The size of this pool is chosen depending on the planned location, as well as on the area of ​​the site.

This species is similar to the previous one, which is installed on top of the ground, and is not mounted in a niche, which is typical of stationary basins. Externally, the design is similar to the pit, which is fixed in one place. Inside it is filled with water. This design is usually not rearranged, installing for several years.

These pools basically have a PVC frame. This material does not harm human health, does not emit harmful toxins. That is why both children and adults swim in these pools. Outside, the structure is faced with a metal frame or plastic panels. Wherein Try to use the strongest finishing options.

The frame pool is usually round, but there are also square models. The frame pools made of plastic have a bright and unusual design,such subject can become a highlight of your seasonal dacha. But products with a metal frame look more simple and straightforward.

But this type of pool has some drawbacks. So, it requires regular maintenance, unlike the models of the previous type. The inner part of the pool should be carefully treated and washed with special agents.

Frame models must be covered, otherwise the structure will deteriorate due to external influences. Therefore, at the time when you do not use it, you need to close it with a cloth or cover. Such a cover can be purchased complete with a pool. It protects it from insects, leaves and rain. This design requires constant and regular monitoring to ensure hygiene.

The pool has an impressive size. On the site it takes up a lot of space and looks quite massive, since its construction is not dug up and rises above the ground. It is noticeable and therefore in any case will become the central part of your summer cottage. To transfer such a model, it is necessary to completely empty and disassemble it.

But the frame pools are not designed to move and transport, therefore, from a large number of assembly cycles - the parsing design may break. In addition, it is not so convenient to drain water from it, as, for example, from an inflatable pool.

The cost of this design is average. They are more expensive than inflatable options, but cheaper than deep models. This pool is perfect for an average or large suburban area. But in a small garden, it will look too massive.

But this model, compared with the previous one, is more reliable. The foundation pit is more robust, so there is no likelihood of a puncture or damage in the absence of obvious mechanical effects. It is easy to use: you just need to fill the structure with water with a hose. Such models look bright and stylish. They are easy to pick up and fit into the layout of the suburban area

The lifetime of the frame model is up to 10 years. Such a pool can have a depth of up to 2 m. Deeper and, accordingly, high constructions look unpresentable. This pool gives space for swimming and water games.

This option is a niche in the ground that has a concrete base. Concrete is finished with facing materials in such a way that the design looks presentable and pleasant to the touch. There are also models that can be mounted in an already excavated pit. They are ready-made bowls. It is only necessary to prepare a niche of the required size.

This is the most expensive, but the most reliable type of summer pool for the garden. It is the most durable, it is almost impossible to damage it. All its main part is located underground and securely fortified. That is why it is so easy to use. In addition, you can easily find the required size. Outwardly, it looks so massive as, for example, frame.

It is linear, not bulk. Thus, the deep pool has no bumps and looks minimalistic. Although you will not have the opportunity to trim its sides, as it can be with a frame option, but externally the design can be made very presentable. So, on top of the edges you can carry high-quality finishing materials and interesting patterns.This is the most interesting design, since it can be represented in the form of a wide variety of shapes and fancy geometric shapes.

This pool provides a wide range of features that you can increase. So, you can organize the function of the constant circulation of water, as well as heating. It can be supplemented with backlight and hydromassage function. In this way, deep pool can be a highlight of the landscape design of your summer house.

It is very easy to install all these additional functional elements, since the base of the pool is deep under water. Therefore, you can easily hide all communications. But this is the most capricious in the care of the form of the pool, it requires constant care. It must be regularly washed and replaced with water. In addition, it is the most expensive design. To install it will have to apply a lot of effort.

Such models are the most difficult to install compared to other designs. In addition, this requires a number of preparatory procedures, arrangement of the deepening. Its disassembly is complicated. For this it is necessary to produce a number of construction works.Lower-priced bowls are easier to install on your own.

The cheapest plunge pools are plastic bowls. They are also installed for a long time, but not so reliable. The design is lightweight and resistant to external influences, including chemical. A ladder for descent can already be built in such a bowl in advance, which facilitates the convenience of its operation.

On average, the thickness of its walls is about 1 cm. Such models do not require additional finishing. Plastic bowls can hold about 9000 liters of water. They can also install additional massage devices. For installation prepare a ditch, the concrete basis or a timbering.

Separately, it should be noted economical homemade pool options. So, they are made from film or banner ads. This is an excellent option if you suddenly decide to organize a pool, but do not want to spend money on a large structure. For it, it is only necessary to dig up a small trench, in which you need to lay a thick film or banner.

The film unfolds and straightens inside the pit, and on top of the edges it is pressed by bricks or stones.Then the water flows in there, and in just a couple of hours you can already use this pool when the water warms up a little. This is a draft pool for personal casual use.

There are other classifications of pools. So, there are winter indoor constructions, as well as summer constructions, which are placed outdoors. There are collapsible pools, which include inflatable and frame, and a separate version - a stationary pool, which is presented in the form of a deep model.

Also pools are overflow and skimmer. The first type involves the installation of a special grate along the side, which will take water into a special storage tank. Thus, this pool can be filled to the brim. It involves continuous circulation and the presence of a good water purification system. The second version of the pool is filled approximately 15 cm below the edges. In this case, the water in it is not spilled. The system has a special filter - skimmer.

Separately, it should be noted a small decorative pool.Its function is the decoration of the landscape design of the villa and the transformation of the territory of the site. As a rule, these are small multi-tiered tanks. They are filled with water, and plants are placed in vases or in pots on each tier. As a rule, they are also installed in the pit.

Most often you can find a round or oval pool. The shape usually depends on the design. So, if it is a small outdoor pool, then most likely it will have a rounded shape. But you can also find small rectangular pools. Inflatable models are more often round because they are easier to install. This design is somewhat similar to the swimming circle. In addition, the round design looks more reliable. There are inflatable models that taper slightly upwards like bowls.

As for the frame pools, then the variations of forms are more diverse. So, it can be models of the correct round, oval form. Some tall models may also taper upwards. Frame pools often have the shape of a polyhedron.That is why they may look completely different. There are also diamond-shaped, and pentagonal frame models, and even products in the form of a trapezoid or parallelepiped. The round frame pool is also popular, but it looks a bit simpler.

As for the deep stationary models, there is a huge number of options for forms. As a rule, such models do not have the correct forms and are presented in the form of curvilinear rather unusual structures. Outwardly, they are not at all like standard geometric shapes.

So, you can find interesting models that are made in the form of washcloths or pools in the form of whole streams. Such designs are more suitable for long and elongated suburban areas. There are also non-standard models that are similar in shape to a cloud or even a usual puddle, but this form is more interesting. Popular models in the form of eight. So, they represent two circles, which have a slight narrowing to the center, and one of the circles is always smaller than the other. Another option - a deep pool in the form of an hourglass.

The shape also depends on the type of construction.As a rule, an indoor pool has a more regular shape, since there is an installation near it that completely covers it from above on the type of roof. But the outdoor outdoor pool can be almost any shape.

As for the placement of the pool, on the summer cottage it is usually installed near the house. This is due to the fact that there must reach all communications, so that you can get water.

If it is a deep pool, then it can be done a little further from home, since this design does not seem massive. But large frame models can be placed around the house, since all the buildings in one place will look more harmonious. In order to make the placement of the frame pool more appropriate, you can install a small podium with a ladder near it. Thus, it will be easy to get in and out after swimming.

It is no secret that all pools require cleaning.Most often, the water is cleaned with a special filter. This is especially true for open structures, since they require constant maintenance and cleaning of contaminants. So, first of all, for outdoor pools it is necessary to purchase special nets. With their help, you can remove large debris from the water, for example, leaves.

But to clean large pools you need to buy a special vacuum cleaner for water. But the dirt in it accumulates mainly at the bottom. It is to eliminate the need to install the filter. So, you can purchase filter models with a pump. Customer testimonials show that they are the most effective and are excellent in combating pollution.

The system of their work is as follows: water passes through the filter and is cleaned of all impurities. After cleaning the water returns to the pool. Reviews of the owners show that it is better to use a sand filter for heating and cleaning the pool. But constantly filtering the same water is not so useful. In addition, filters are often clogged. That is why the pool owners indicate that it is better to periodically drain the water.

To clean the pool and ensure its hygiene, you need to properly disinfect it. To do this, you must purchase chemicals, such as chlorine or liquid oxygen.They allow you to control the hardness of water and make it transparent. In addition, they do not give water to bloom.

In addition, in some outdoor pools, the water warms up for a very long time, so they need heating. To make the water in the pool warm, you can use a special electric heater. This is a system that runs on electricity. This heater has special sensors that reflect the temperature of the water, which you can regulate. They also allow you to control pressure.

They are very easy to care for and maintain. In addition, you can set the desired water temperature, and it will be constantly maintained in the pool. Another option - heated pool with a heat exchanger. This design looks like a flask of metal. It has two closed circuits, one of which transfers heat to the water.

Heat exchangers have a special control unit with which you can monitor the parameters of water. When the water temperature drops, you can open the valve and turn on the circulation pump.

At the dachas you can equip the most economical version of the heated pool - a solar collector, which does not require energy costs at all. But the disadvantage of such systems is that the pool water can warm up only on a sunny summer day. The collectors are made of flat segments that are made of small black polypropylene tubing. It is in them that the water is heated by solar radiation.

The heater can be installed in a water filtration system. And the solar battery itself is better to put on the roof of the house if the pool is located near or directly beside it.

Another modern heating option that pool owners praise is the heat pump. He is able to quickly and efficiently heat even the largest option. It has a pipe - coil, which is located under the pool and heats it from the inside. There are systems designed for outdoor pools, there are pumps for indoor pools. All of them differ in their power and different functions.

By design, the models are film, tile and mosaic. PVC pools trim using coiled material. As a rule, they prefer blue, turquoise, blue, and also white models. But there is also a PVC film with beautiful patterns, including mosaic ones. In this way, You can simultaneously perform two important things at once: to finish the pool and to ensure good waterproofing.

Popular propylene finish. Such models can have a bright design. Polypropylene is a high-quality and dense plastic. Glossy coatings are especially popular. With them the pool will look presentable. It can be white or blue, also any you wish, including green or even dark. It all depends on your choice and imagination.

The most beautiful and colorful option are the pools, decorated with mosaic tiles. At their facing apply a tile with low percent of water absorption. Thus, the tile is laid both inside the pool and on its sides. As a rule, she trim depth models. The tile is not selected monophonic. It can be a combination of different blue-blue shades.Thus, you can make a beautiful play and make the pool more bright.

Some prefer to trim the pool with wooden slats. They are installed both in the deep pools and in the form of a podium around the frame models. Some models are bricked up. This finishing option is perfect if all designs on your summer cottage are made of similar materials. In addition, it will be a durable and beautiful design.

Some frame pools around are lined with stones of different sizes, around which also set the bumpers. Thus, you can walk on pebbles, and then go swimming. This will keep your feet healthy. In addition, this is a great decor option.

How to make a pool in the country with their own hands, see the following video.