Focus Floor floorboard: features and specifications

Parquet is a rather aesthetic flooring, which immediately indicates a high status in the society of home owners. In the market of finishing materials, these products are represented by a wide choice. Among these floor coverings is the Focus Floor flooring. What are the features of this product, and what are its characteristics, let's see.

The floorboard Focus Floor is produced by a subsidiary of the concern Karelia-Upofloor (Finland), located in Russia. It was founded over 15 years ago, the production is located in the city of Kaluga. The factory that manufactures this product is equipped with the most modern equipment that allows you to produce high quality products.

Parquet Focus Floor has a number of advantages:

• Its most important advantage is the cost. These products quietly compete with other well-known brands that are produced by the largest companies.This was achieved due to the lack of advertising, the use of simple ways of tinting slats, as well as low delivery costs.
• In the manufacture of wood flooring used Russian wood, which also affects the cost.
• At the same time, this product has a fairly high quality. It will easily compete with famous European brands.

• The board has all the quality certificates that such products should have. It fully complies with GOST RF.
• The warranty period for Focus Floor parquet is 10 years, and the useful life of this material is unlimited. He is not afraid of any changes in humidity, or a seasonal change in the temperature of the room.
• There are several colors of the Focus Floor floorboard, which have no analogues to any manufacturer.

There are practically no drawbacks to the floorboard Focus Floor, except for a not too large collection of models.

The design of the floorboard Focus Floor consists of five components.

1. Coniferous base. It compensates for the voltage, is located parallel to the upper layer, ensures the stability of the parquet strip as a whole.
2. Panel end amplifier. This is an innovative manufacturer, which allows you to increase the wear resistance of the floorboard.
3. Stabilization layer. Here the wood is located across the finishing layer. Coniferous wood is also used for the production of rails.
4. Finishing layer. It is made of valuable varieties of wood. This wood creates a pattern that we see on the floor.
5. Coating. For this purpose, oil is used, which allows the planks to give a natural look, emphasize the wood texture, highlight the contrast of the natural ornament, or acrylic lacquer, giving the parquet a shine. The coating is carried out in 5 layers and protects the wood from abrasion and aggressive environmental influences. Including from burning under the action of ultraviolet.

The panels have a lock of the second generation, which allows laying the coating without the use of glue.

The floorboard Focus Floor is available in two types: single-sided or three-way.

The thickness of the board is 14 mm, which is quite enough to ensure good thermal and noise insulation. The length and width depends on the number of lanes. For single-lane, these parameters are 1800x138 mm, for three-lane - 2200x188 mm.Package size for Focus Floor parquet is 2 square meters. m

There are several original samples in the Focus Floor model range.

Oak Kalima. The finishing layer consists of an oak sorting natures, which suggests that the pattern of wood contains almost no knots. The color of this parquet is quite light, the strips are covered with matte varnish. The sides of the parquet panel do not have a chamfer, which allows you to make a single smooth coating. Such a model is able to refresh any interior.

Shamal Oak. It is also oak parquet, which has a dark shade and an interesting color scheme of wood pattern contrasts strongly, stretching the strip along the entire length of the plank. It also does not have a chamfer, covered with acrylic lacquer, which prevents the influence of ultraviolet radiation on wood.

Tramontana Oak. This is almost a black coating that will accent in any room and will attract the eye, and semi-gloss shine adds elegance to the interior.

Ash Tehuano. The gray tint of this flooring is ideal for many modern interiors. These brushed strips, that is, the soft fibers of the wood are removed with the help of special brushes, thereby creating a relief surface that will further emphasize the naturalness of the coating.

The choice of Focus Floor floorboard depends on several aspects.

• It is necessary to determine the bandwidth of the coating. If you want the strips on the floor to be wide, then you need to purchase single-sided samples. If you are a fan of thin panels, then in this case a three-lane board will suit you.
• Need to choose a shade. The color of the floor not only depends on your preferences, but must also be combined with the rest of the interior. Ideal if the color of the floor and wooden furniture are made in one color. But it looks interesting, and when the floor contrasts with the situation, for example, a dark floor is laid in a white room.
• Need to choose the density. So oak parquet will be stronger than ash.

Buyers speak well of the Focus Floor floorboard. They talk about the excellent combination of price - quality, long life of the coating. It lies securely on the floor, does not creak and retains its appearance for many years.

About what make mistakes when laying floorboard, see the following video.