Barlinek floorboard: choose quality at a reasonable cost

Modern trends in interior decoration involve the use of natural materials, one of which is the Barlinek flooring, which is popular all over the world. The history of the production of the eponymous company from Poland began in the post-war years with the production of sawn timber.

Barlinek floorboard is a very famous and sought-after flooring thanks to the following indisputable advantages:

• absolute ecological safety of products is achieved through the use of natural raw materials. In contrast to the laminate flooring has a warm surface and well regulates the humidity in the room;
• high resistance to mechanical stress. The surface of the floorboards is not subject to scratches and chips, and the board itself has a strong and impact-resistant structure. The coating is repairable: if necessary, it is possible to replace individual damaged areas and restore the lacquer coating, for which the manufacturer gives a 12-year warranty;

• A huge range of products with a large variety of colors and textures of natural wood provides ample choice of coverage for any room. A well-thought-out pricing policy and competent logistics make it possible to produce quality products at low prices, which further increases its popularity;
• High moisture resistance and heat resistance of the board allow using it in any conditions without restrictions. Thanks to a special locking design, paving can be done independently.

Before proceeding to the manufacture of floorboard, the material is dried in special chambers. This is done so that during operation the board does not deform and crack. Next is the sawing and degreasing of wood.After that, the blanks are primed and prepared for assembly, which is carried out on German high-tech equipment.

The floorboard is made of three layers, which are located at an angle of 90 degrees relative to each other - crosswise. The outer layer is made of selected wood, which is covered with oil or varnish on top. The two lower layers are coniferous wood sheets. This design provides increased durability and rigidity of the coating and eliminates the negative reaction of wood to excess moisture and temperature drops. Floorboards do not creak, do not crack and do not swell.

The basis of the top layer is a wooden sheet with a thickness of 3.5 mm, containing a pattern of wood fibers and the desired color. The middle layer has the largest thickness of 7 mm and is responsible for the strength and elasticity of the board. Make it from larch or pine.

The upper protective layer is made of double acrylic coating, which is fixed with ultraviolet rays.This is followed by three layers of primer, also fixed by UV rays. Each subsequent layer is not applied until the previous one is dry. Due to this, the color of the coating becomes deep, and the protective coating is strong and durable. Such a surface is not afraid of household chemicals and excessive moisture.

In addition to varnish, in the manufacture of floorboard applied impregnation of natural oil. After oil treatment, the surface acquires a noble appearance, the wood pattern becomes deep and expressive, and the dust and dirt-repellent properties of the material increase.

How Barlinek flooring is made, see the next video.

Barlinek floorboard can be one-, two- and three-way. Single-sided models consist of a solid canvas and are much more expensive composite. These products look very solid and presentable and resemble a massive board. The floorboard of two-and three-strip models consists of 2 or 3 narrow slats and is distinguished by a wealth of patterns and colors. Externally composite structures resemble parquet.Such models are available in a wide range of colors and a wide variety of designs.

The number of knots is a decorating element and can be large, medium and small. Brushing is also a popular type of board design and consists in creating artificial abrasions and general aging of the surface. Such models are ideal for Scandinavian, rustic and vintage styles.

The unique design of the lock allows you to quickly mount and dismantle the coating. Laying floorboard in two ways. The first - the most simple, is to assemble the cover with the help of a locking system. Each panel has a groove and a crest, thanks to which the coating is assembled as a designer. The substrate of cork mats or corrugated cardboard aligns floor defects and height differences, which allows ideally evenly lay the floorboard and as much as possible prolongs the term of its service.

The second method is more laborious and involves gluing each floorboard to the subfloor. In this case, the loudness of the coating, which occurs when floorboards resonate, significantly decreases.

This is a more reliable and durable option, but it is recommended to perform it by experienced craftsmen. The floorboard has a high heat resistance, so it can be laid on the floor with any type of heating.

How to lay the floorboard, see the following video.

Barlinek coating is made from coniferous and exotic tree species. An array of acacia, badi, wenge, merbau, and a unique hoist tree is used. The unusualness of this tree species consists in the illusion of luminescence and the luxurious texture of the coating, as well as in the high performance properties of wood.

Total involved in the production more than 20 varieties of wood. The most common are oak and beech. Glossy, matte and semi-gloss varnish, as well as natural oil are used for surface finishing. The use of various combinations of colors and coating compositions allows to achieve a huge variety of shades and depths of textures.

Products are represented by two types."Ash parquet board" is a leader in demand and is used in all types of residential and public buildings. Light tones of the coating visually increase the space and bring lightness to the interior. For such a coating is easy to find furniture and decorative elements. Produced by "Ash parquet board" in all shades of pastel tones, as well as milky, cream and vanilla colors. The cost per square meter of coverage ranges from 1.5 to 5 thousand rubles.

"Ash" is produced in one-, two-and three-strip versions. Single-strip models are practically indistinguishable from solid parquet, which makes them in demand when finishing strict and solid premises. Composite panels differ in various color scale and game of half tones. Proper combination of such floorboards allows you to get a complex spectacular pattern and helps to diversify the simplest room. The cost of multiband boards is a bit cheaper than monopanels, which makes them even more popular among consumers.

“Parquet board ash” is made from environmentally friendly natural raw materials. The coating is easy to clean and does not tend to accumulate dust.Due to the unique castle construction, the cracks and cracks are completely absent.

The second type of product - "Wood flooring oak". It is able to decorate and ennoble any interior and is present in all produced collections. Produced in a wide palette of colors and textures, which greatly facilitates the choice of coverage in any interior. The presence of both cold and warm colors allows you to use the floorboard in all modern and classic styles. The correct model will be ideally combined with pieces of furniture and design elements.

Especially popular is the model "Bleached Oak". White color harmonizes perfectly with all contrasting shades and brings a feeling of purity and freshness to the room. Available in one-, two- and three-lane versions, which allows you to choose coverage in any price category. Single-band models will suit eco-style, loft and country, and composite models will perfectly decorate minimalism, traditional style and high-tech.

The dimensions of parquet boards correspond to 220 cm in length, 20.7 in width and 1.4 centimeters is the thickness of the floorboard. Such dimensions were dictated by spot positioning with the possibility of the most convenient fastening of the panels to each other, as well as the desire to more accurately convey the appearance of the traditional parquet. The density of wood is 700 kg per 1 m3, and the hardness ranges from 3.8 points for oak to 4.1 for ash in the Brinell system.

The company produces six floorboard collections. Each contains high quality unique models of natural flooring:

• "Senses". The collection includes eight series "parquet oak". One of the representatives of this chic collection is the model “Harmony”, represented by single-strip pearl-white oak boards, decorated with natural oil. The surface of the panels is brushed, which gives the coating a noble and solid look and allows you to create an imitation of luxury parquet;

• "Tastes of Life" includes 16 models made of oak and ash wood. The most popular is the model "Brownie Grande", made in a single-band version and has a double coloring of brown tones, including cream and beige.Each panel is equipped with a microface that allows you to select each floorboard and emphasize the geometry of the room.

• "Pure Vintage" consists of three oak models. The most purchased of them is “Porto Grande”. The boards undergo the process of artificial aging, are covered with warm brown oil and have elegantly cut chamfer. The model best conveys the aesthetics of natural wood and looks harmonious in any interior;

• "Pure Line" - the largest collection, numbering 17 oak and ash models and presented in a wide range of colors. The collection contains items both white and almost black. A typical representative of this collection is oak flooring "Espresso Piccolo". Boards are made in a very dark color and have a knot structure, and a threaded chamfer visually lengthens them;

• "Decor Line" includes 13 types of parquet. Very unusual is the ash model “Coffee Molti”. The surface is brushed and coated with matte varnish. Annual rings have a distinct pattern, which is complemented by small patches of knots and color spots.The boards are dark brown in color and look very presentable;

• Life Line consists of 13 models with oak and ash execution. The most exotic model of the collection is “Sipadan Molti”. The floorboards are made of hoist wood and have a very interesting color, composed of brownish tones with ashy inclusions. The surface is coated with varnish, which creates an additional effect of glow and looks very unusual.

Barlinek floorboard is a stylish element of decor and immediately focuses attention on itself, emphasizing the aesthetics and nobility of natural materials.

The deep colors of the wood hoist flooring will bring variety to the modern design and harmoniously blend with the ceiling, emphasizing color symmetry.

Single-strip oak model perfectly imitates the wooden floor of the wide boards.

Dark brown model of the floorboard creates an atmosphere of rigor and looks pretty pompous. Looks good in both classic and modern interiors.

The three-lane parquet board Barlinek successfully combines all shades of brown - from delicate sepia to very dark coffee, and perfectly imitates traditional parquet.

Oak wide board light natural shades - a godsend for the rustic and ethnic styles. It will harmoniously fit into the interior and complete the image of the room.