How to cut a tile grinder?

When repairing many homeowners, there is a need to cut ceramic tiles that can be made using a grinder. This tool allows you to do this work at a high level, with minimal risk of chipping or cracking. In this article we will discuss how to cut ceramic tiles with the help of a grinder.

Cutting ceramic tiles implies a time-consuming process that requires maximum concentration. The difficulty is largely due to the fact that the tile consists of durable material. Without dust, tiles can be cut and washed down with a tile cutter, but such a tool is not cheap. With the help of ordinary cutters and saws, it is almost impossible to do this, while the cut will certainly be uneven and unattractive. It is best to use the usual grinder, a cutting wheel which allows you to carefully cut the tile, even at home.

Despite the fact that this process is relatively complicated, if you get the hang of it, it will not take much time and will not require much effort. This task is able to cope with an ordinary homeowner who has not dealt with such work and will be able to cut off even the hog without the help of tile cutters.

You can cut tiles with the following tools:

• special tile cutter;
• diamond tools;
• Bulgarian.

To perform the work in question, you do not need to purchase any special equipment. Domestic grinder and grinder are ideal for creating high-quality cut. These tools can be purchased in every hardware store at an affordable cost. The main thing to pay attention to when choosing is the quality of the disc.

For cutting ceramic tiles, those who have a diamond coating are suitable. Their use minimizes the formation of cracks and chips. It is forbidden to use the discs used for working on metal, because with them you only damage the tile. Even if you manage to cut with such a circle, it will be uneven and of poor quality.This is due to the slip of the disk on the tile, because of which the presence of small cracks is inevitable. In this case, when it comes to home surface finishing, then you can not pay attention to these damages, since they are sure to disappear during subsequent processing.

When cutting with the grinder, be sure to take care of the protection measures. The presence of goggles is important, because during work you can damage your eyes due to sparks or fragments of tiles. You can buy them at any hardware store.

Be sure to carry the following attributes with you:

• glasses;
• mask;
• thick gloves.

Please note that the selected grinder or grinder must have a speed regulator, since many modern low-cost tools do not have this function. Such models function at the highest speed, because of which it is impossible to cut tiles with their help.

Using tiles to finish the walls, there is a need to cut a part of the slab so that it fits into the remaining space.In this case, a similar procedure is required regardless of what type of tile you choose. Cutting is required most often in cases where unique patterns are created on the walls or various decorative objects are formed using tiles.

If you have already prepared all the necessary attributes for the work, you can consider how to properly cut the tile. The Bulgarian is a great helper in this issue, since with its help you can create not only straight sections, but also figured ones. Next, we will look at how to cut tile in various ways.

Straight cut is as simple as possible:

• First you need to fix the tile on the plane so that it does not crawl and ride on it.
• The part of the tile that needs to be cut must remain on the weight. The surface line will be the guideline for the notch line;
• It is necessary to take the grinder so that you could see the cut line. If you hide it from yourself, you will not be able to make an even cut.
• To direct and move the blade you need to yourself, not from yourself. This is the mistake many newbies make. Hold the tool firmly and evenly, so that it does not go in different directions, otherwise the cut will be ugly.Holding the grinder crookedly, you can ruin the disk, because it can fly off because of this.

The round hole is as follows:

• Initially, you must use a marker to draw the required hole. Draw on the glossy side of the tile.
• Then you need to determine the center of the circle. This can be done with the help of straight lines drawn crosswise.
• Carefully sawn grinder tile from the inside in a circle until then, until we dive.
• It is necessary to turn the grinder so that the blade gradually fits into the outlined circle.
• When the cut is deep enough, you need to cut the drawn cross along the drawn lines, and then carefully take out the 4 sectors of the circle.

It is necessary to cut the tile only on the front side, since only in this way it will be possible to get a cut without various defects. Consequently, all possible damage will be concentrated on the back of the tile, which will be hidden with the help of tile glue.

It is best to measure and mark the tiles to be cut from the very beginning.

To cut at a 45 degree angle, follow the instructions provided:

• It is important to note that cutting tiles diagonally is more difficult than making a straight cut. However, it is much easier than creating curly elements. You need to start with to do.
• The grinder must be turned in such a way that the disk is located at the angle you need, and you must carefully drive the blade, removing the excess, so that at the end a straight angle cut is obtained.
• Ideality can be achieved through the use of conventional sandpaper, which is best to fix on the bar.

The grinder should be set at a low speed so that you can control and correct its actions. Having the opportunity to fix the tool, be sure to do it, because this way you can simplify the work. Having fixed the grinder, you will need only to move a tile on the necessary trajectory.

If the possibility of fixing is missing, then the floor will be the best place to work. Under the slab be sure to put the bars or lumber. It is important to note that set a low speed should be also due to the fact that it will prevent the blade or disk from being dropped when in contact with the surface.

Including the maximum speed, for sure you will simplify the cutting process, but this increases the risk of damage to the tile, which can simply scatter into pieces. The easiest way to cut appears in a straight line option, since even a novice can handle this job. If we are talking about rounding, then more effort will be required. If you have not previously encountered this kind of work, we recommend that you first try your skills on defective material.

To protect the tile from chipping, you can use a special grinder or sandpaper. This work is not difficult, but it will significantly improve the quality of the cut. This way you can get rid of the existing defects.

Be sure to follow the following guidelines:

• need to work in special clothes;
• safety glasses are required;
• it is recommended to use ear plugs when working;
• all used devices must be in good condition;
• work can be performed only by adults who know the safety rules for using cutting tools;
• during wet processing, make sure that the grinder does not get into the water, as this can lead to electric shock;
• slices cannot be processed at maximum speed;
• need to work in a room with good ventilation.

To maintain your health, it is imperative that you follow these guidelines.

Next, see a master class on cutting tiles grinder.