Alutech Gate: Quality and Reliability

The famous company Alutech is known to almost every person who has ever been interested in high-quality gate and roller shutter systems. The range of the brand is quite wide, among which you can certainly pick up what you need.

About why products from the brand are considered high-quality, reliable and practical, you will learn in this article. In addition, you will learn about the features of this product and some other important points.

The gates of Alutech are used in the construction of private houses, cottages, garages and even parking lots. Before you buy products of this brand, you should learn about some of its features:

• Gates comply with European and international quality standards.The high quality of Alutech products is confirmed by appropriate certificates, as well as test reports of various international companies.
• The company has its own production. All gates are made using high-tech production, modern equipment and time-tested materials.
• Alutech products are sold in many countries around the globe, including Russia. The excellent quality of the gate is especially appreciated in Europe. Today, products are sold in more than 65 countries.

• Among the wide range you can find automatic and mechanical gates, as well as panoramic, garage and industrial door systems.
• Products are considered to be fully safe to operate, regardless of whether the gate is set in motion with the help of an electric drive or manually.
• Alutech gates are resistant to burglary; in addition, an additional security system can be installed on them.
• Any kind of gate from the brand will help to provide not only excellent heat, but also noise insulation in the garage room.

• Products are covered with special coatings that protect them from various external influences, corrosion and sudden temperature changes. Maximum durability is obvious.
• According to certain calculations, Alutech garage systems can last more than twenty years. And with proper installation and further care much more.
• Due to the special equipment of the door systems, the products do not creak when they open and do not emit unpleasant noises.

Gates Alutech can cost customers a lot of money, but they will surely meet all expectations and even surpass them.

The standard set of Alutech gates includes:

• direct canvas (upper and lower sandwich panels of the corresponding metal);
• lifting device standard configuration;
• special security systemwhich is used to protect the blade from its accidental fall, even if the spring breaks or the main cable breaks;

• videos necessary so that the gate systems do not creak, but open smoothly;
• internal bolt, handle, bolt lock, cord for closing, as well as a complete set of parts for installation and mounting;
• control system - a chain reducer, a block for manual lifting of the blade, as well as electric drives of various types (rack or bulk).

Depending on the type of gates or other, some components may or may not be present. The gates are very often part of the gate, which can be built into them or be located nearby. Very often they are located in the facade of the building.

The wide range of brands includes the following types of gates:

• Garage. Can be roller shutter (roll) and sectional.
• Entry.

• Industrial. Suitable for regions with a harsh climate, as well as for rooms with excessively high humidity.
• Panoramic. They have a fairly wide range of glazing options, as well as great opportunities for use.

Types of structures are divided into:

• lifting;
• swing;
• retractable (with special console systems).

By type of control products can be:

• mechanical;
• automatic;
• with remote control.

Panoramic gates from the brand are considered very reliable because they are made of modern and high-quality aluminum. Aluminum profiles with acrylic inserts not only look expensive, but also fully correspond to their price. In addition, such products are more resistant to various adverse precipitation.

Also in the manufacture of doors used high-quality aluminum alloys, which are additionally coated with paint and varnish, resistant to corrosion and various mechanical influences from the outside.

The Alutech brand takes care of its customers, since its assortment includes the widest range of colors in which certain types of gates can be made.

The most relevant colors are options for natural wood.. Garage doors in dark oak or dark cherry color are most often chosen for private property.

The brand also offers standard shades in the color palette from classic white, red and green to dark blue. Basically, the coating is glossy.

Immediately I would like to note that, in addition to the fact that you can buy ready-made gates of standard sizes, you can also order products according to your own dimensions.

The maximum dimensions of the industrial doors are 7,000 by 6,000 mm, and the panoramic ones by 5,000 by 5,300 mm.

Entrance doors from the Elegant series have a maximum size of 4250 by 2460 mm (sliding), and swing doors - 4000 by 2585 mm. Models «Comfort» - 5000 to 3210 mm. “Trend” with tension springs - 3500 by 3085 mm, and with torsion springs - 6000 by 3250 mm. The variants from the “Classic” series have almost the same size.

Installation of the gate can be carried out by professionals in any opening. The sizes of these or those types of gate should be learned from consultants of the company.

In addition, more detailed information about a particular gate system can always be found on the official website of the brand, and also make an approximate calculation of how much the future product will cost you.

Select the gate should be based on your personal preferences and, of course, the necessary characteristics, which must have products of this type.

If you live in a region with a temperate climate and you need a gate for a garage with normal humidity, then be sure to pay attention to garage options from the Trend series. For buildings with good heating and for regions with cold climates, the company offers the Classic series.

For industrial facilities of various purposes, it is best to choose ready-made sets of “ProTrend” portal systems. They have optimal characteristics and attractive prices.

Panoramic doors with stainless steel parts can be found in the AluPro series. They have a wide range of features and many additional options. The weight of the glazed sections is optimal. Options with double and even triple glazing are presented in the AluTherm collection.

Entrance gates are presented in a large assortment. As for the rolling options, they should be chosen if you want to purchase not only a high-quality product, but also with a trendy and modern design. Wing options are considered one of the most reliable in their design features. They are easy to assemble and install.

All gates from Alutech are good in their own way. They have excellent features and capabilities.

The durability and preservation of the presentable appearance of the gate depends on the quality of the installation.

Installation of any gate systems should be carried out by qualified craftsmen. It is possible that you can do the installation yourself, but it can be difficult to do it yourself.

However, if you decide to do the installation yourself, in preparation for work, be sure to thoroughly study the step-by-step instructions and the assembly scheme that come with the gate. Even if you do not have questions with the assembly, they may appear when setting up automation, as a result of which you may still need the help of a wizard.

Installation of garage systems takes place on torsion springs with a special clutch that can be adjusted. During installation, the recommended thickness of the opening should be approximately ten centimeters.

Height adjustment is made by moving a special loop.If the appearance of the future gate is very important to you, then the masters of Alutech took care of it. Since the designs of garage products have hidden installation, and the profiles themselves are not visible from the outside, this gives them a special attraction.

Adjustment of automatic types of gates should be carried out according to a special instruction that is attached to one or another type of gate. To program the drive of a garage or sectional door, and also to adjust its work qualitatively, may seem like a difficult task.

To automate products, Alutech uses high-quality and powerful electric drives from proven European manufacturers. A special remote control will act directly on the control unit, as a result of which the canvas will open.

Automatic control system is considered reliable, practical and convenient. It is chosen most often. With the remote control, you can easily open the gate without even leaving the car. If there are any faults in the system, the gate can be opened manually.

The owners of the Alutech gate confirm the excellent quality and reliability of the products with their positive reviews. Many customers note that over the years of operation, the automatic gates did not break and did not bring them any inconvenience. For excellent quality, customers are willing to pay slightly inflated, in their opinion, prices.

Many masters are pleased with the finished set of gates, to which you do not need to buy anything extra. Simple diagrams and detailed instructions allow you to install the door system in the shortest possible time. Many customers do the installation themselves at all. In addition, a big plus, according to many buyers, is a wide range of door systems. Among him Customers can purchase the most common models of garage doors, and fire, and panoramic with very high-quality glazing.

Given the mass of a wide variety of reviews, we can conclude that the gate systems from Alutech are really worthy of attention. They are time tested, and their quality is beyond doubt.

How the installation of sectional doors Alutech occurs in the video below.