Peaks for the fence: we increase the protection of the fence

Forged fences on home plots and cottages traditionally have a considerable number of adherents. Even against the backdrop of a modern cottage, as well as being surrounded by a house imitating an old estate, they look very attractive.

Protection will be better, and the appearance is better if you use curly peaks.

Peaks are suitable only on forged fences. Great variety of external form, but most commonly used flattened metal petals. Cones with three or four faces are widely used.imitations of spear or arrowhead. You can make these imitations both textured and flat.

Along with this, parts of forged barriers that reproduce an elongated triangle with equal sides quite well manifest themselves.

"Fir-trees" or imitations of figurines can look very elegant. As for the material, the advantage of cast-iron tops is an impressive variety, and the weak point is the insufficiently effective fixation on the steel fence.

Peaks from cast iron initially more decorative things than protective. Steel elements for the fence are easily attached to steel bases and at the same time sharp enough to reliably block the invasion of unauthorized persons.

The choice of a particular type of peak is also determined by their appropriateness in a particular case, for example, the cast tops of the fence are unacceptable on a beautiful forged barrier, where they will look unnatural.

Decorative elements can be put on the upper parts of the fences, and below. The tops, mounted at different heights by the type of waves or semicircles, make it possible to create a slightly rounded fence. Such a step helps to correct the insufficient height of the sections, if we increase the canvas both from above and below.

.

On forged fences, peaks with an internal cavity are most often placed; the manufacture of steel allows you to paint the metal, varnish it and decorate it in any other way.

In addition to forging, well manifest themselves and ornaments from the profile. To get them, the steel sheet is cut into tips of a pointed form, and these blocks are placed on top of the fence. Although this solution began to be applied only some time ago, it is easy to install, you can even do all the work with your own hands.

In some cases wood peaks can be usedwhich give to the fences a view of a stocking; such blocks are installed as pommel, and they may not form a monolithic composition with the fencing itself. For the manufacture of wooden structures using woodworking machines.

Most consumers are dominated by the stereotype that cast metal peaks are very expensive. Most likely, such representations are caused by the high cost of wrought iron fences and decorations for them. The conclusion is simple: products from the profile are much more economical, and they need to be chosen for maximum savings.

But if you still have the opportunity to buy forged barriers, you need to focus primarily on the geometric configuration of the peak. These elements must be larger in cross section,than the main details of the fence, because otherwise the location at the top is not harmonious enough, and the bad-looking ends of the fences will be opened.

When choosing the appearance of decorative products, you need to be interested in their compatibility not only with the fence, but also with the yard, the house and the street in general. Think about the quality of the image, and the consistency of its parts.

The cost of construction is directly proportional to how complex its configuration: each curl, each small detail and a small fragment increase the cost of work and the amount of consumable material.

If you can not choose a suitable solution among serial products presented in stores or in catalogs, you can always make an individual order - the quality and price will be no worse in this case.

Metal peaks must be installed using a welding machine; step-ladders help to simplify and facilitate the process. It is advisable to do work with a partner, because it greatly improves the result, and also makes the process safer. When the peaks are selected according to the exact dimensions and geometry, it is easy to mount the tops with your own hands.

If these requirements are not met, there is a high risk that the resulting structure will not be harmonious enough.

Peaks made of wood are held on the upper parts of the fences with self-tapping screws, they are certainly covered with a layer of protective varnish. In most cases, the fencing itself and wood decorations for it are ordered at the same time in one company, since otherwise many problems may arise.

Wooden peaks are made relatively simply, the main tool in the work is a jigsaw (conventional or electric). It is recommended to draw on paper the scheme of the future barrier and its decor in order to avoid possible mistakes and miscalculations.. Pointed elements are cut out of the usual beam in accordance with the marking.

Consider that it is not necessary to mark the entire beam, about a third of it remains in reserve - it is needed for subsequent fixing. It is necessary to cut out the details as they are reduced, and the web is to be firmly fixed so that the jigsaw moves as clearly and predictably as possible. The edges of the blanks are polished to a perfectly smooth state with emery paper.

Self-production of forged rush impractical, professional performers will do the same work faster and better. An alternative is the use of a metal sheet., which is marked with a marker and cut along the lines with special scissors.

Such accessories are versatile, they look organically on forged, and made of metal profiles, and even on wooden fences.The shape of the slice in any case should correspond to the slice of the fence. Plastic designs are more decorative than help protect the house and yard.

On how to make forged peaks with your own hands, see the following video.