Installation of the fence from the universal grid "Gitter"

Modern intake systems are high constructions without a single gap and clearance. Great look fence from the grid "Gitter." Such fences are not only well ventilated, but also let the sun's rays through.

Installation of the fence from the universal grid "Gitter" is carried out in the shortest possible time, and it can be done without the help of specially trained specialists.

Welded mesh "Gitter" - is a modern alternative to the previously popular mesh chain-link. This product combines welded masonry mesh with square cells and thick wire.

The fence of this material is a sectional fence consisting of steel rods, interconnected by bridges. Each span is fixed to the support uprights with four clamps.

The rods are made of steel wire with a section of 3-5 mm with a corrosion-resistant polymer, powder or electroplated coating. A wire of 3.2 mm diameter is suitable for private property fencing, and for industrial purposes, stronger rods with a diameter of at least 5 mm are required.

Section formats are different and depend on the purpose of the fence. The standard width is constant, amounting to 2.5 m. The height can vary from 1.0 to 2.4 m. The number of stiffeners directly depends on the last indicator, for example, in a section one meter high there will be two, respectively, in two meters - four. The grid cells are 50x100 mm and 50x200 mm. Other options do not exist.

The color palette is varied. Gray is the standard, classic version. But besides him, at the request of the customer, manufacturers can paint the grid in a different color.

There are eight colors on the RAL scale to color it:

• the black;
• Gray;
• dark grey;
• green;
• blue;
• redhead;
• cherry;
• brown.

In recent years, very high demands have been placed on fences of any type, since they often serve not only as barriers to the penetration of undesirable persons into a certain territory, but also play the role of an effective addition to the design.

The fence from the grid "Gitter" meets all the requirements, because it has several advantages:

• Strength. According to manufacturers, the strength of the “Gitter” grid is comparable to the strength of corrugated fences and other metal fences.
• Reliability. The fence from the Gitter lattice completely fulfills its main duties, as it protects the territory from the invasion of unauthorized persons and animals. The welded mesh construction has no support points, but there are protrusions that make unauthorized penetration difficult.
• Versatility. It can be installed in any type of soil, regardless of the topography of the territory and in any terrain.

• Long service life. The minimum period of operation of this design is 25 years, the maximum - 50 years.
• Ease of care. The grid does not need to be cleaned, repaired, painted annually, spending material, physical and time resources on these manipulations. If the fence still needs to be repaired, it will not be necessary to remove the entire fence; it is enough to remove one span and make a replacement.
• Transparency. 3D transparent, which provides a good overview of the territory, the plants in the garden area receive a sufficient amount of light.
• Low weight. Sectional fences have a small mass compared to other types of protective structures.

• Easy installation. Due to the low weight, the installation of the fence from the “Gitter” net occurs quickly without the use of physical force.
• A variety of color palettes. Samples of universal mesh are made in different colors, so you can choose the most appropriate option for their possessions.
• Availability. The optimal price allows you to buy a universal grid for people with different incomes.
• Aesthetic look. The grid “Gitter”, despite its simplicity, looks presentable especially against the background of living plantings.

The only drawback to the fences from the “Gitter” grid is that they are not suitable for places where reliable protection against drafts is needed. As well as 3D fencing can not be a useful acquisition for the owners of sites who are accustomed to live behind deaf two-meter fences.

The grid "Gitter" has excellent operational and decorative properties, therefore applied almost everywhere:

• on car parkings;
• in the territories of entertainment complexes and business centers;
• as a fence of sports fields and children's play;
• in private ownership.

There are such options for the fence from the grid "Gitter":

• the dacha grid is used for fencing of private possessions (summer cottages, gardens);
• the industrial version serves as a fencing of the area belonging to industrial organizations, trading floors, parking lots, shops;
• The regime variant is constructed for the protection of regime institutions (laboratories, military facilities);
• The public grid is suitable for fencing educational institutions of different profiles (kindergartens, schools, universities).

The fence model determines how it is installed. Swing gates and gates for fences with 3D sections “Gitter” are represented by several options - “Classic 20”, “Classic 15” and others.

On the modern market there is a large variety of fences that can satisfy the needs and financial capabilities of each customer.

There are certain nuances of the choice of this type of products that do not depend on the appearance and base material of the fence:

• Location. The object around which the fence will be built plays an important role. From this factor depends on the purpose for which the fence will be erected: protection, decor.
• Dimensions. The height of the fence should not be above the first floor of the architectural structure.
• Design. The landscape design and appearance of the fence should overlap. The color of the product is of great importance.
• Landscape. Before installing the fence, you need to know the type of soil, whether ground water flows under the site.
• Main function. Fences can perform a decorative or protective function.
• Cost This factor sometimes becomes decisive in choosing a product. Metal fences 3D is an option that anyone can afford.

The versatility of the fences "Gitter" allows you to install them yourself. This allows you to not spend money on wages masters. The fence constructed by rules turns out strong, durable and beautiful. The standard width of one section is 2.5 m. It is mounted on supports - steel pipes. In this case, transverse crossbars are not required, as stiffening ribs are already provided in the basic configuration of the grids.

The installation of the fence from the grid "Gitter" occur in a certain sequence:

• At the first stage plotting of land, after - a peg is hammered, a string is stretched around the perimeter of the territory and the marking of the place where the gate and the gate will stand is performed. The markup is produced by a tape measure, and the pillars are leveled using a water level.
• The points of the markup put support. The distance between them should correspond to the width of one intake segment.
• If the supporting pillars are mounted on a concrete or asphalt surface, the fastening of steel pipes is performed with anchor bolts. They are screwed into the holes of the flanges welded to the supports.

• If the posts need to be dug into the ground, then, depending on the type of support, they can be fixed in the ground by means of concreting or rubbing with crushed stone. You can partially fill the pit with concrete or fill it all. The first option is suitable if the soil has good strength. The lowering of the pole into the earth’s depth is carried out one meter in depth, and the concrete mixture must be filled only in half of the recess. If the soil is weak, the ground is light, then the concrete is completely filled with the pit.
• Another way to fix the pillars with further attachment to them of the grid "Gitter" - is the placement of pipes on screw piles.They are simply screwed into the ground, and then they are fixed pillars. This method is faster than others and requires the least amount of labor. You can install sections on the same day as the supports are installed.
• The final stage Fence devices using the universal grid are the simplest in design. After installation of the supports, it remains to mount the sections. For these purposes, clamps, pressure plates and brackets are used.

The shape of steel pipes in cross section significantly affects the method of securing sections. It can be round and square. If there are no holes on the supports, the holes can be made independently (drill out in the right places with a drill). Metal fixing bolts are often replaced with metal screws.

Fasteners can be metal and plastic, the latter are allowed to work, despite the apparent fragility. Such products reliably connect all elements of the structure, serve for a long time, do not react to negative environmental factors. At the end of the work on top of the end of the supports you must install plugs.

How to install the fence "Gitter" with your own hands, shown in the video.