Thermo warm floor: advantages and disadvantages

The warm floor system from the Swedish company Thermo has been pleasing users with its quality for over 20 years. Thanks to electric heating, it became so easy to achieve warmth and comfort in any room.

Sweden is the location of Thermo, which specializes in floor heating systems. Products under this brand began to be produced in 1991, and since then it has rapidly gained popularity throughout Europe and beyond. Warm floor is characterized even distribution of air flow, which allows the products of this company to compare favorably with competitors.

Due to the special setting of the equipment, the Thermo electric floor allows to achieve the most comfortable temperature at the level of the legswhich ideally should not be above 24 degrees. Above the feet, the temperature should decrease by 4 degrees. Thanks to electronic control systems, you can set the desired mode, which regulates heating to the exact temperature. Indeed, in different rooms may need different levels of heat.

The durability and reliability of Swedish floor heating equipment is backed by a guarantee. The company with full confidence accompanies its products long warranty service, which is 20 years.

Thermo floor heating is a universal system, it is often used in apartments and even in office premises. In some cases, it is the main source of heat in the room. But most often it is used as additional heating.

The characteristic of the warm floor of this company, which plays a significant role in the choice of heating systems - its aesthetics. If the system is correctly mounted, it will not be visible at all. The only thing that indicates that there is a warm floor in the room is neat elegant thermostat, which, as a rule, hang on the wall. Thanks to his beautiful design, he will easily fit into any interior without attracting too much attention to himself. And also it will allow you to easily adjust the required floor temperature depending on the situation.

The basis of the warm floor of the Swedish company is the technology of the cable system. The main heating element is a three-layer cable or heat cable. It is firmly attached to the mat, so installation is carried out without additional difficulties. With the help of electronic sensors and thermostat to set the required temperature is easy and convenient. Because of this, Swedish warm floors are simple and comfortable to use.

Swedish floor heating systems are available in two types. First option - "Thermocable"- cable. It is characterized by the need to make a concrete tie, the thickness of which should be about 4 cm. This device has a capacity of 130 W / sq. m

This system is based on a 7 mm diameter cable with additional reinforcement and shielding. The device is also characterized by the presence of a connecting wire, sealed adapter and terminations. Guaranteed reliable isolation of the device due to the special material PVC and silicone.

The second type of flooring is called "Thermomat". It is based on special mats, for the installation of which there is no need to equip a concrete-cement screed. It is enough to use a self-leveling compound, which is applied in a layer of 4 mm thick. You can replace it with tile glue. The maximum power of the heating mats is 180 W / sq. m

This device also has a two-core cable with a diameter of 2.8 mm. The cable is used with shielding and reinforcement. The mat is insulated using a 0.5 cm wide Teflon coating.

Choosing the right type of floor, should take into account all the requirements that apply to him. The dimensions of the room are taken into account, and the presence or absence of additional sources of heating is taken into account.

Approaches to the installation of a warm floor vary depending on the choice of the type of device. In the case of the cable before starting work, it is necessary to draw up a diagram of how it will lie. On the plan they mark the place where the heating element will be located, indicate the position of all the sensors, and also mark the point where the system will be connected to the electrical network. Pre-prepared strobe should be laid where the thermostatic wires and temperature sensors.

In the next step, the insulation layer is laid. Without it, you can not do if the screed thickness of more than 3 cm. The working surface requires thorough cleaning before laying the cable. It is important to pay attention to the fact that there is no furniture at the location of the heater.

At the last stage, they are engaged in mounting sensors and thermostat. It is important to check the proper operation of the power supply. Finish the job by fixing the cable using a cement screed.

Working with a heating mat is not much different from installing a cable device. First, a laying pattern is created. This stage is important, because if a separate section of the system ceases to work, the scheme will help orient oneself in its location. Next, the wall is strobed in the place where the sensors and thermostat will be located.

Heating mats are also highly recommended to install in a place that will be free of furniture. They are laid in strips, starting along the wall, and then in the mat itself, a cut is carefully made and, turning it around, they are laid parallel to the fixed strip. After installing all the elements of the system check the power. And then the mats are poured with tile adhesive. It is advisable to wait about a week before the glue dries completely.

The heat-insulated floor from the Swedish producer does not need additional service during operation. Standalone mode works fine on its own, but, nevertheless, it is recommended not to leave the system off for a long time. Lack of prolonged downtime prevents unwanted system failures.

Reviews of floor heating Thermo confirmed declared by the manufacturer of quality. The users of these heating systems are satisfied with their work. They note the safety of their operation, simple installation and comfortable use.

Floor heating is most often installed in the bathroom, in the kitchen or on the balconies. This allows you to create a comfortable temperature in these areas without using additional radiators. Traditional heaters strongly dry the air and also provoke additional dust and drafts.

Conventional heating system strongly warms the air closer to the ceiling, leaving a fairly low temperature directly above the floor. Thermo heated floors create a comfortable temperature regime, warming the legs and leaving a pleasant coolness at the level of the head.

Electric floor heating system is ideal for installation under the tile. It remains completely invisible, while warming the cold surface of the floor. The system can be used in the bathroom in conditions of high humidity. Users using Swedish bathroom floor heating systems note that this solution has made their lives much more comfortable.

Simple installation allows you to perform all the work without the involvement of specialists. It also allows you to save money and make repairs yourself.

Heated floor is very relevant for apartments and houses, where small children live. They spend a lot of time playing on the floor, so it is important that hypothermia does not occur. Not always, even a high pile car can warm the baby on the floor, and the electric heating system is completely safe, environmentally friendly and provides a comfortable temperature for the baby to play on the floor.

Especially appreciated the function of setting the desired temperature mode, which is in these systems. For each room, you can choose your mode that will make your stay in the room as comfortable as possible.In the kitchen, you can leave a cooler temperature, and in the nursery, on the contrary, set the mode warmer.

According to reviews, the cost of heating systems for the Thermo floor is not too high. At the same time, the quality of the devices is all praised. The systems are very accurate, which guarantees the installation of heating with an accuracy of one degree. However, they are fireproof and their installation does not raise the height of the floor.

Purchase and installation of Thermo warm floor systems significantly increases the comfort of living. This device allows you to make aesthetic repairs without installing bulky radiators. It can be installed under the parquet and under the tile. It will perform its functions both in small rooms and in rooms with a large area, provided that the type of system and its power will be correctly chosen. Universality of systems, their comfort and safety provide the popularity of warm floors Thermo.

See how to install Thermo floor heating in the bathroom in the next video.